大疆社区

标题: 今天升级3A固件，失败，机器长鸣不亮灯，咋办？（3天后，自行解决问题） [打印本页]

作者: 有声有摄 时间: 2017-8-5
标题: 今天升级3A固件，失败，机器长鸣不亮灯，咋办？（3天后，自行解决问题）
本帖最后由有声有摄于 2017-8-9 09:52 编辑

[{"nameindex":"_1_1","type":1,"url":"","desc":"\u5f00\u59cb\u8fd8\u662f\u5347\u7ea7\u6210\u529f\u7684\u63d0\u793a\r\n\r\n\u6362\u4e00\u5757\u7535\u6c60\u7ed9\u7535\u6c60\u5347\u7ea7\u611f\u89c9\u5c31\u51fa\u95ee\u9898\r\n\r\n\u770b\u4e86\u4e00\u4e0b\u9690\u85cf\u6587\u4ef6\uff0c\u7ffb\u4e86\u8d34\u5b50\uff0c\u96be\u9053\u6211\u7684\u673a\u5668\u5347\u7ea7\u641e\u574f\u4e86\r\n\u51fa\u73b0\u4e86N\u591a\u95ee\u9898","imgsrc":"static\/image\/text.jpg"}]

作者: 有声有摄 时间: 2017-8-5
[00027346]Firmware upgrading[1]...
[00027426][11 00] Firmware upgrade start...
[00012561]========== 2017.03.22 09:01:37. boot(15) ============
[00012631]Packet [C:\P3S_FW_V01.10.0090.bin] detected, card sn [0x0650314c].
[00012700]Packet upgrade start...

[00012775]Packet checking...
[00012853]Packet vlink 01.10.0090 <-> 01.10.0090.
[00012927]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00013009]Done.

[00013080]Version checking[1]...
[00013192][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013292][03 06][00] v2.4.20.28 -> v2.4.20.28
[00013383][04 00][00] v1.48.0.0 -> v1.48.0.0
[00013652][11 00][00] v1.8.0.0 -> v1.8.0.0
[00013792][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00013868][11 01][00] v1.8.0.0 -> v2.0.0.33
[00013995][12 00][00] v1.11.0.0 -> v1.11.0.0
[00014095][12 01][00] v1.11.0.0 -> v1.11.0.0
[00014221][12 02][00] v1.11.0.0 -> v1.11.0.0
[00014336][12 03][00] v1.11.0.0 -> v1.11.0.0
[00014410][15 00][00] v1.1.2.0 -> v1.1.2.0
[00014516][17 00][00] v1.1.1.7 -> v1.1.1.7
[00014675][17 01][00] v1.0.2.7 -> v1.0.2.7
[00014776][19 00][00] v1.0.8.96 -> v1.0.8.96
[00014852][01 00][00] v1.25.5432 -> v1.25.5432
[00014923][01 01][00] v1.25.5432 -> v1.25.5432
[00015037][09 00][00] v3.0.0.10 -> v3.0.0.10
[00015102]Packet upgrade cancelled at version checking.

[00000717][01 00] Firmware upgrade finished failed (step = 3, err = 0xffffffff).
[00013002]========== remo-con disconnect. boot(15) ============
[00013080]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00013154]Packet upgrade start...

[00013237]Packet checking...
[00013311]Packet vlink 01.11.0020 <-> 01.11.0020.
[00013394]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00013468]Done.

[00013553]Version checking[1]...
[00013663][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00013782][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013868][04 00][00] v1.48.0.0 -> v1.48.0.0
[00014050][11 00][00] v1.8.0.0 -> v1.8.0.0
[00014204][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00014279][11 01][00] v1.8.0.0 -> v2.0.0.33
[00014421][12 00][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00014532][12 01][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00014656][12 02][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00014796][12 03][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00045371][15 00][00] device not detected.
[00045493][17 00][00] v1.1.1.7 -> v1.1.1.7
[00045653][17 01][00] v1.0.2.7 -> v1.0.2.7
[00045748][19 00][00] v1.0.8.96 -> v1.0.8.96
[00045819][01 00][00] v1.25.5432 -> v1.25.5432
[00045891][01 01][00] v1.25.5432 -> v1.25.5432
[00046063][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
[00046147]Done.

[00048218]Waiting for user confirm...
[00058296]Timeout, start upgrade automatically.

[00058448]Firmware upgrading[1]...
[00058538][12 00] Firmware upgrade start...
[00011022]========== remo-con disconnect. boot(0) ============
[00011100]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00011177]Packet upgrade start...

[00011259]Packet checking...
[00011334]Packet vlink 01.11.0020 <-> 01.11.0020.
[00011410]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00011485]Done.

[00011563]Version checking[1]...
[00011674][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00011793][03 05][00] v34.2.0.9 -> v34.2.0.9
[00011875][04 00][00] v1.48.0.0 -> v1.48.0.0
[00012038][11 00][00] v1.8.0.0 -> v1.8.0.0
[00012192][11 01][00] v1.8.0.0 -> v2.0.0.33, firmware v1.8.0.0 not support.
[00012270][11 01][00] v1.8.0.0 -> v2.0.0.33
[00012389][12 00][00] v1.12.0.0 -> v1.12.0.0
[00012502][12 01][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00012626][12 02][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00012761][12 03][00] v1.11.0.0 -> v1.12.0.0 need upgrade.
[00017336][15 00][00] v1.1.2.0 -> v1.1.2.0
[00017442][17 00][00] v1.1.1.7 -> v1.1.1.7
[00017584][17 01][00] v1.0.2.7 -> v1.0.2.7
[00017683][19 00][00] v1.0.8.96 -> v1.0.8.96
[00017766][01 00][00] v1.25.5432 -> v1.25.5432
[00017839][01 01][00] v1.25.5432 -> v1.25.5432
[00017933][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
[00018009]Done.

[00020082]Waiting for user confirm...
[00030164]Timeout, start upgrade automatically.

[00030319]Firmware upgrading[1]...
[00030411][12 01] Firmware upgrade start...
[00093388][12 01] Firmware upgrade finished successfully.
[00093480][12 02] Firmware upgrade start...
[00154578][12 02] Firmware upgrade finished successfully.
[00154674][12 03] Firmware upgrade start...
[00214766][12 03] Firmware upgrade finished successfully.
[00215142][03 06] Firmware upgrade start...
[00011172]========== 2017.08.05 15:42:57. boot(15) ============
[00011262]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00011344]Packet upgrade start...

[00011432]Packet checking...
[00011511]Packet vlink 01.11.0020 <-> 01.11.0020.
[00011599]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00011677]Done.

[00011766]Version checking[1]...
[00011869][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012010][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012108][04 00][00] v1.48.0.0 -> v1.48.0.0
[00024700][11 00][00] device not detected.
[00037288][11 01][00] device not detected.
[00049871][12 00][00] device not detected.
[00062453][12 01][00] device not detected.
[00011131]========== 2017.08.05 15:44:15. boot(15) ============
[00011211]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00011301]Packet upgrade start...

[00011389]Packet checking...
[00011472]Packet vlink 01.11.0020 <-> 01.11.0020.
[00011556]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00011642]Done.

[00011718]Version checking[1]...
[00011872][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012012][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012110][04 00][00] v1.48.0.0 -> v1.48.0.0
[00024695][11 00][00] device not detected.
[00037282][11 01][00] device not detected.
[00049865][12 00][00] device not detected.
[00062448][12 01][00] device not detected.
[00075046][12 02][00] device not detected.
[00087663][12 03][00] device not detected.
[00011093]========== 2017.08.05 15:46:15. boot(15) ============
[00011177]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00011260]Packet upgrade start...

[00011344]Packet checking...
[00011426]Packet vlink 01.11.0020 <-> 01.11.0020.
[00011504]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00011596]Done.

[00011674]Version checking[1]...
[00011830][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00011943][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012030][04 00][00] v1.48.0.0 -> v1.48.0.0
[00024710][11 00][00] device not detected.
[00037310][11 01][00] device not detected.
[00049894][12 00][00] device not detected.
[00011488]========== remo-con disconnect. boot(15) ============
[00011564]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00011642]Packet upgrade start...

[00011719]Packet checking...
[00011801]Packet vlink 01.11.0020 <-> 01.11.0020.
[00011878]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00011966]Done.

[00012052]Version checking[1]...
[00012156][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00012276][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012365][04 00][00] v1.48.0.0 -> v1.48.0.0
[00024945][11 00][00] device not detected.
[00011500]========== remo-con disconnect. boot(15) ============
[00011575]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00011652]Packet upgrade start...

[00011732]Packet checking...
[00011814]Packet vlink 01.11.0020 <-> 01.11.0020.
[00011893]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00010559]========== remo-con disconnect. boot(15) ============
[00010639]Packet [C:\P3S_FW_V01.11.0020.bin] detected, card sn [0x2850ff0b].
[00010709]Packet upgrade start...

[00010797]Packet checking...
[00010872]Packet vlink 01.11.0020 <-> 01.11.0020.
[00010961]Record vlink 01.10.0090 <-> 01.10.0090 (flow = 0).
[00011039]Done.

[00011117]Version checking[1]...
[00011220][03 06][00] v0.0.0.0 -> v2.4.20.50 need upgrade.
[00011335][03 05][00] v34.2.0.9 -> v34.2.0.9
[00011421][04 00][00] v1.48.0.0 -> v1.48.0.0
[00023995][11 00][00] device not detected.
[00036578][11 01][00] device not detected.
[00049157][12 00][00] device not detected.
[00061733][12 01][00] device not detected.
[00074313][12 02][00] device not detected.
[00086895][12 03][00] device not detected.
[00119474][15 00][00] device not detected.
[00132064][17 00][00] device not detected.
[00144648][17 01][00] device not detected.
[00144777][19 00][00] v1.0.8.96 -> v1.0.8.96
[00144963][01 00][00] v1.25.5432 -> v1.25.5432
[00145040][01 01][00] v1.25.5432 -> v1.25.5432
[00145158][09 00][00] v3.0.0.10 -> v4.1.0.0 need upgrade.
[00145235]Done.

[00147317]Waiting for user confirm...
[00157400]Timeout, start upgrade automatically.

[00157567]Firmware upgrading[1]...
[00157876][03 06] Firmware upgrade start...

作者: 春媚 时间: 2017-8-5
楼主您好，换升级好的电池装上飞行器，APP会出现异常提示吗？查看了您发送的升级log文件，其中有几个模块一直是没有检测到导致的升级失败哦（其中包括了电池模块），建议您尝试重新插拔电池，格式化SD卡，重新升级试试。

作者: 有声有摄 时间: 2017-8-5

春媚超级版主2017-8-5 19:23
楼主您好，换升级好的电池装上飞行器，APP会出现异常提示吗？查看了您发送的升级log文件，其中有几个模块一直是没有检测到导致的升级失败哦（其中包括了电池模块），建议您尝试重新插拔电池，格式化SD卡，重新升级试试。

我可能开始没有表达清楚

按你的说法，重新格式化卡之后，换回开始的电池重新升级固件，结果还是和开始发贴时的问题一致

3A的机器上的所有灯都不亮，一直是短促的长鸣声，持续不断:滴。滴。滴。。。。

作者: 夏清 时间: 2017-8-6

有声有摄精灵32017-8-5 21:16
我可能开始没有表达清楚

按你的说法，重新格式化卡之后，换回开始的电池重新升级固件，结果还是和开始发贴时的问题一致

3A的机器上的所有灯都不亮，一直是短促的长鸣声，持续不断:滴。滴。滴。。。。

楼主，您的飞行器升级前开机可以正常自检吗？
从您的升级文件看，有部分模块检测不到哦，如果您一直无法正常升级，可以寄回我们帮您检测处理

作者: 有声有摄 时间: 2017-8-6

夏清超级版主2017-8-6 11:35
楼主，您的飞行器升级前开机可以正常自检吗？
从您的升级文件看，有部分模块检测不到哦，如果您一直无法正常升级，可以寄回我们帮您检测处理

升级之前没有任何问题啊！

真心郁闷啊

作者: 有声有摄 时间: 2017-8-6

夏清超级版主2017-8-6 11:35
楼主，您的飞行器升级前开机可以正常自检吗？
从您的升级文件看，有部分模块检测不到哦，如果您一直无法正常升级，可以寄回我们帮您检测处理

这样情况都说不清楚了，升级造成的损失，这个费用由谁来承担啊？

作者: 夏清 时间: 2017-8-7

有声有摄精灵32017-8-6 12:06
这样情况都说不清楚了，升级造成的损失，这个费用由谁来承担啊？

您寄回后我们会检测之后联系您沟通维修情况的

作者: 有声有摄 时间: 2017-8-9
昨天都准备网上填单寄修了

重新看了一下升级要求：

电池要求充足
出现问题，重新格卡，更换电池，静置20分钟以上再试

于是重新下载，重新格卡两次，再换上性能最好的一块满电，放上柜子中，让它自己一直滴滴滴

半小时之后，发现之前不亮的灯居然重新亮，而且还是升级正常的亮灯

赶紧拿出摇控连接飞机，显示已经是最新固件，然后顺手把摇控器也升级了

至此，升级总算成功了！

反省之前升级失败，有可能是电量不足，造成机器强制保护。现在电量正常重新升级，机器的保护时间可能已经过了，毕竟离最初出问题，已经过了近72小时了。

BTW：以后再有升级问题，还是要多点耐心，给机器一个自我恢复的过程

欢迎光临大疆社区 (https://bbs.dji.com/)