大疆社区

标题: Phantom 3 Advanced 固件升级包 v1.2.8 遇到问题 [打印本页]

作者: SD studio 时间: 2015-6-19
标题: Phantom 3 Advanced 固件升级包 v1.2.8 遇到问题
模块自检只提示：相机需要升级

Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.02.0007.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.02.0007.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.02.0007.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3S_FW_V01.02.0007.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

作者: 夏清 时间: 2015-6-19
楼主您好，请问您是否有下载V1.2.8固件包进行升级呢？

作者: SD studio 时间: 2015-6-19
<div class="quote"><blockquote><font size="2"><a class="nopicture" rel="noopener" href="https://bbs.dji.com/forum.php?mod=redirect&goto=findpost&pid=164843&ptid=14784" target="_blank"><font color="#999999">夏清发表于 2015-6-19 13:40</font></a></font>
楼主您好，请问您是否有下载V1.2.8固件包进行升级呢？</blockquote></div>就是V1.2.8固件包升级的，现在只提示相机需要升级

作者: 夏清 时间: 2015-6-19
<div class="quote"><blockquote><font size="2"><a class="nopicture" rel="noopener" href="https://bbs.dji.com/forum.php?mod=redirect&goto=findpost&pid=164848&ptid=14784" target="_blank"><font color="#999999">SD studio 发表于 2015-6-19 13:43</font></a></font>
就是V1.2.8固件包升级的，现在只提示相机需要升级</blockquote></div><font size="3">您的TXT文件中显示版本为</font><font size="3">V01.02.0007哦，建议您在以下链接中下载V1.2.8版本固件，再进行一次升级</font>
<font size="3">http://www.dji.com/cn/product/phantom-3/download</font>

欢迎光临大疆社区 (https://bbs.dji.com/)