大疆社区

标题: 固件升完级“炸”回旧版本了! [打印本页]

作者: Kingboy    时间: 2015-6-19
标题: 固件升完级“炸”回旧版本了!
精3银色版,19-Jun-2015 21时许升完固件,开机提示已是最新版本,升空,不到2分钟哐掉下来了!钻人家车底下去了都,螺旋浆仍狂转,捡起来强拔电池才制服!
重新开机提示有新固件要升级!!

作者: Kingboy    时间: 2015-6-19
标题: 精灵3刚升完固件就炸回原型了!!
精3银色版,19-Jun-2015 21时许升完固件,开机提示已是最新版本,升空,不到2分钟哐掉下来了!钻人家车底下去了都,螺旋浆仍狂转,捡起来强拔电池才制服!
重新开机提示有新固件要升级!!新固件是不是有问题呢?
作者: 壕    时间: 2015-6-19
你确定升级成功了?
作者: 梅州旭日影视    时间: 2015-6-19
强烈要求退回旧固件,图传変差的问题让人不得不怀疑厂家是不是有什么目的?
作者: hbsttv    时间: 2015-6-19
大疆的升级就是个笑话
作者: Kingboy    时间: 2015-6-19
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.06.19 21:19:43 =====================
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.06.19 21:40:35 =====================
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
作者: AK47    时间: 2015-6-19
Are you ok?
作者: yellver    时间: 2015-6-19
又一个小白鼠,还好我聪明,没升级,等看别人各种吐槽!!!
作者: 414746308    时间: 2015-6-19
Kingboy 发表于 2015-6-19 23:22
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
这明显是没成功么,我也遇到了这个问题,太特么奇怪了。

作者: Kingboy    时间: 2015-6-19
本帖最后由 Kingboy 于 2015-6-19 23:44 编辑

[00011741][01 00] Firmware upgrade finished successfully.
[00011860]Done.

[00011892]Packet [C:\P3S_FW_V01.02.0008.bin] resumed, card sn [0x30ce14bf].
[00011927]Version checking[2]...
[00012007][03 05][00] v34.2.0.8 -> v34.2.0.9 need upgrade.
[00012093][03 06][00] v2.1.6.18 -> v2.2.6.8 need upgrade.
[00012129][04 00][00] v1.36.0.0 -> v1.38.0.0 need upgrade.
[00012188][09 00][00] v1.7.0.3 -> v1.7.0.3
[00012308][11 00][00] v1.6.0.0 -> v1.6.0.0
[00012401][12 00][00] v1.8.0.0 -> v1.8.0.0
[00012476][12 01][00] v1.8.0.0 -> v1.8.0.0
[00012556][12 02][00] v1.8.0.0 -> v1.8.0.0
[00012641][12 03][00] v1.8.0.0 -> v1.8.0.0
[00012682][15 00][00] v1.1.2.0 -> v1.1.2.0
[00012756][17 00][00] v1.1.1.2 -> v1.1.1.6 need upgrade.
[00012877][17 01][00] v1.0.2.4 -> v1.0.2.5 need upgrade.
[00012928][19 00][00] v1.0.8.96 -> v1.0.8.96
[00012963][01 00][05] v1.14.3090 -> v1.14.3090
[00012996][01 01][00] v1.7.2735 -> v1.14.3090 need upgrade
[00013030]Done.

[00013061]Firmware upgrading[2]...
[00013215][01 01] Firmware upgrade start...
[00043487][01 01] Firmware upgrade finished successfully.
[00043547][17 00] Firmware upgrade start...
[00140858][17 00] Firmware upgrade finished successfully.
[00140902][17 01] Firmware upgrade start...
[00204401][17 01] Firmware upgrade finished successfully.
[00204456][03 05] Firmware upgrade start...
[00275356][03 05] Firmware upgrade finished successfully.
[00275577][03 06] Firmware upgrade start...
[00585888][03 06] Firmware upgrade finished successfully.
[00585950][04 00] Firmware upgrade start...
[00643617][04 00] Firmware upgrade finished successfully.
[00643650]Done.

[00643683]Version checking[3]...
[00643757][03 05][05] v34.2.0.9 -> v34.2.0.9
[00643817][03 06][05] v2.2.6.8 -> v2.2.6.8
[00643858][04 00][05] v1.38.0.0 -> v1.38.0.0
[00643902][09 00][00] v1.7.0.3 -> v1.7.0.3
[00644137][11 00][00] v1.6.0.0 -> v1.6.0.0
[00644218][12 00][00] v1.8.0.0 -> v1.8.0.0
[00644317][12 01][00] v1.8.0.0 -> v1.8.0.0
[00644417][12 02][00] v1.8.0.0 -> v1.8.0.0
[00644607][12 03][00] v1.8.0.0 -> v1.8.0.0
[00644641][15 00][00] v1.1.2.0 -> v1.1.2.0
[00644734][17 00][05] v1.1.1.6 -> v1.1.1.6
[00644846][17 01][05] v1.0.2.5 -> v1.0.2.5
[00644901][19 00][00] v1.0.8.96 -> v1.0.8.96
[00644940][01 00][05] v1.14.3090 -> v1.14.3090
[00644973][01 01][05] v1.14.3090 -> v1.14.3090
[00645003]Packet upgrade finish successfully.








作者: 753181263@qq.co    时间: 2015-6-19
我的也是刚更新固件,今天飞视觉定位不稳定,从3米直接炸机,电机也停不了,哎想返厂检修呢!
作者: yanlixiang    时间: 2015-6-20
哈哈哈,大哥,你是不是遥控器没有刷新?
作者: yyfnet    时间: 2015-6-20
升级等于炸鸡,又可以多卖些灰机了。
作者: 925053551@qq.co    时间: 2015-6-20
端午楼市暴跌,飞机也炸得如此狂欢啊
作者: 263165@qq.com    时间: 2015-6-20
还停在1.18的飘过~~一切正常就没升
作者: 夏清    时间: 2015-6-23
楼主您好,请问您是否方便留下联系方式,我们会与您联系,为您查明原因。
作者: Kingboy    时间: 2015-6-23
夏清 发表于 2015-6-23 11:11
楼主您好,请问您是否方便留下联系方式,我们会与您联系,为您查明原因。 ...

已经提交了飞行记录和飞行器的飞行参数,暂未回复
作者: 夏清    时间: 2015-6-23
Kingboy 发表于 2015-6-23 17:34
已经提交了飞行记录和飞行器的飞行参数,暂未回复
好的,分析后我们会与您联系。





欢迎光临 大疆社区 (https://bbs.dji.com/) Powered by Discuz! X3.2