今天升级 Phantom 3 Professional 固件升级包 v1.2.6版本
无人机升级成功，文本显示成功，但用sd卡升级遥控器，遥遥无期的红色闪缩和滴滴声。用了第二种方法连接usb 升级 也是一样，结果现在遥控器都无法连接无人机了，什么校准都根本无法使用，显示没连接，这功能都不让用
结果我再用 sd卡想 遥控器自我修复一下 就显示下列文本了
Result: Success.
========== 2015.07.18 21:18:38 =====================
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2015.07.18 21:21:01 =====================
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
