大疆社区

标题: 双11买的精灵3p 没图传，固件升级还失败！新手求助 [打印本页]

作者: zeldella 时间: 2015-11-15
标题: 双11买的精灵3p 没图传，固件升级还失败！新手求助
双11买的精灵3p 没图传，固件升级还失败！新手求助
按说明书和视频上的步骤来的。第一次开机注册APP 然后上边说没有图传信号！又说提示模块升级
遥控器是1.43 飞机1.03 就是升不到 1.04 求助！！

作者: zeldella 时间: 2015-11-15
郁闷啊！咋整的呀
期间联系看各种帖子
弄了N次还是升级不上去

作者: 86878904 时间: 2015-11-15
首先必须的激活，然后才能升级，如果是1.3.2版本以前的必需先升级成1.3.2然后才能升级成1.4版本

作者: zeldella 时间: 2015-11-15
已经激活了啊进入软件第一件事就是激活

作者: zeldella 时间: 2015-11-15
本帖最后由 zeldella 于 2015-11-15 16:29 编辑

怀疑是图传坏了 NOTE3和ipad 都试了都没有图传要说升级失败的话，在APP里能看见版本号
飞行器1.4.10
遥控器1.4.30

img_0030.png (602.45 KB, 下载次数: 2)

作者: zeldella 时间: 2015-11-15
[00017527]========== remo-con disconnect. boot(15) ============
[00017663]Firmware [C:\DM368Fw.bin] detected, card sn [0x70ce014b].
[00017696][08 00] Firmware upgrade start...
[00522569][08 00] Firmware upgrade finished successfully.
[00522605]Done.

[00012566]========== 2015.08.28 13:35:42. boot(15) ============
[00012600]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0xa0ce0c42].
[00012637]Packet upgrade start...

[00012679]Packet checking...
[00012716]Packet vlink 01.03.0020 <-> 01.01.0009.
[00012787]Done.

[00012823]Version checking[1]...
[00012898][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012958][03 06][00] v2.2.6.19 -> v2.2.6.19
[00012997][04 00][00] v1.40.0.0 -> v1.40.0.0
[00013069][09 00][00] v1.7.0.3 -> v1.7.0.3
[00013178][11 00][00] v1.7.0.0 -> v1.7.0.0
[00013278][12 00][00] v1.8.0.0 -> v1.8.0.0
[00013377][12 01][00] v1.8.0.0 -> v1.8.0.0
[00013477][12 02][00] v1.8.0.0 -> v1.8.0.0
[00013553][12 03][00] v1.8.0.0 -> v1.8.0.0
[00013697][15 00][00] v1.1.2.0 -> v1.1.2.0
[00013762][17 00][00] v1.1.1.2 -> v1.1.1.7 need upgrade.
[00013862][17 01][00] v1.0.2.4 -> v1.0.2.7 need upgrade.
[00013907][19 00][00] v1.0.8.96 -> v1.0.8.96
[00013950][01 00][00] v1.23.3419 -> v1.23.3419
[00013987][01 01][00] v1.23.3419 -> v1.23.3419
[00014040][08 00][00] v0.12.0.4 -> v0.12.0.4
[00014082]Done.

[00016118]Waiting for user confirm...
[00026160]Timeout, start upgrade automatically.

[00026242]Firmware upgrading[1]...
[00026400][17 00] Firmware upgrade start...
[00113026][17 00] Firmware upgrade finished successfully.
[00113081][17 01] Firmware upgrade start...
[00174869][17 01] Firmware upgrade finished successfully.
[00174915]Done.

[00174949]Version checking[2]...
[00175027][03 05][00] v34.2.0.9 -> v34.2.0.9
[00175109][03 06][00] v2.2.6.19 -> v2.2.6.19
[00175152][04 00][00] v1.40.0.0 -> v1.40.0.0
[00175209][09 00][00] v1.7.0.3 -> v1.7.0.3
[00175368][11 00][00] v1.7.0.0 -> v1.7.0.0
[00175453][12 00][00] v1.8.0.0 -> v1.8.0.0
[00175543][12 01][00] v1.8.0.0 -> v1.8.0.0
[00175758][12 02][00] v1.8.0.0 -> v1.8.0.0
[00175833][12 03][00] v1.8.0.0 -> v1.8.0.0
[00175972][15 00][00] v1.1.2.0 -> v1.1.2.0
[00176073][17 00][05] v1.1.1.7 -> v1.1.1.7
[00176217][17 01][05] v1.0.2.7 -> v1.0.2.7
[00176283][19 00][00] v1.0.8.96 -> v1.0.8.96
[00176324][01 00][00] v1.23.3419 -> v1.23.3419
[00176362][01 01][00] v1.23.3419 -> v1.23.3419
[00176411][08 00][00] v0.12.0.4 -> v0.12.0.4
[00176449]Packet upgrade finish successfully.

[00015231]========== remo-con disconnect. boot(15) ============
[00015273]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015312]Packet upgrade start...

[00015355]Packet checking...
[00015397]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015437]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015473]Done.

[00015510]Version checking[1]...
[00015584][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015663][03 06][00] v2.2.6.19 -> v2.3.0.13 need upgrade.
[00015707][04 00][00] v1.40.0.0 -> v1.41.0.0 need upgrade.
[00015769][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015884][11 00][00] v1.7.0.0 -> v1.7.0.0
[00015984][12 00][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00016084][12 01][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00016185][12 02][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00016269][12 03][00] v1.8.0.0 -> v1.10.0.0 need upgrade.
[00028806][15 00][00] device not detected.
[00028895][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029011][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029091][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029131][01 00][00] v1.23.3419 -> v1.23.3419
[00029169][01 01][00] v1.23.3419 -> v1.23.3419
[00041705][08 00][00] device not detected.
[00041748]Done.

[00043784]Waiting for user confirm...
[00053822]Timeout, start upgrade automatically.

[00053897]Firmware upgrading[1]...
[00053951][12 00] Firmware upgrade start...
[00123804][12 00] Firmware upgrade finished successfully.
[00123871][12 01] Firmware upgrade start...
[00186643][12 01] Firmware upgrade finished successfully.
[00186815][12 02] Firmware upgrade start...
[00252392][12 02] Firmware upgrade finished successfully.
[00252451][12 03] Firmware upgrade start...
[00322625][12 03] Firmware upgrade finished successfully.
[00322841][03 06] Firmware upgrade start...
[00676459][03 06] Firmware upgrade finished successfully.
[00676526][04 00] Firmware upgrade start...
[00735505][04 00] Firmware upgrade finished successfully.
[00735546]Done.

[00735585]Version checking[2]...
[00735657][03 05][00] v34.2.0.9 -> v34.2.0.9
[00735722][03 06][05] v2.3.0.13 -> v2.3.0.13
[00735773][04 00][05] v1.41.0.0 -> v1.41.0.0
[00735830][09 00][00] v1.7.0.3 -> v1.7.0.3
[00735939][11 00][00] v1.7.0.0 -> v1.7.0.0
[00736011][12 00][05] v1.10.0.0 -> v1.10.0.0
[00736112][12 01][05] v1.10.0.0 -> v1.10.0.0
[00736187][12 02][05] v1.10.0.0 -> v1.10.0.0
[00736272][12 03][05] v1.10.0.0 -> v1.10.0.0
[00748811][15 00][00] device not detected.
[00748889][17 00][00] v1.1.1.7 -> v1.1.1.7
[00749009][17 01][00] v1.0.2.7 -> v1.0.2.7
[00749114][19 00][00] v1.0.8.96 -> v1.0.8.96
[00749155][01 00][00] v1.23.3419 -> v1.23.3419
[00749192][01 01][00] v1.23.3419 -> v1.23.3419
[00761732][08 00][00] device not detected.
[00761772]Packet upgrade failed at version checking.

[00014946]========== 2015.11.15 12:16:50. boot(15) ============
[00014985]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015024]Packet upgrade start...

[00015067]Packet checking...
[00015113]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015156]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015196]Done.

[00015233]Version checking[1]...
[00015324][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015402][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015452][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015517][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015642][11 00][00] v1.7.0.0 -> v1.7.0.0
[00015736][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015838][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015937][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016143][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028686][15 00][00] device not detected.
[00028813][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028953][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029019][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029060][01 00][00] v1.23.3419 -> v1.23.3419
[00029107][01 01][00] v1.23.3419 -> v1.23.3419
[00041647][08 00][00] device not detected.
[00041688]Packet upgrade failed at version checking.

[00015442]========== remo-con disconnect. boot(15) ============
[00015485]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015526]Packet upgrade start...

[00015570]Packet checking...
[00015619]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015659]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015699]Done.

[00015740]Version checking[1]...
[00015819][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015879][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015930][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015989][09 00][00] v1.7.0.3 -> v1.7.0.3
[00016100][11 00][00] v1.7.0.0 -> v1.7.0.0
[00016189][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016289][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016370][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016455][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028996][15 00][00] device not detected.
[00029084][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029210][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029291][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029330][01 00][00] v1.23.3419 -> v1.23.3419
[00029371][01 01][00] v1.23.3419 -> v1.23.3419
[00041916][08 00][00] device not detected.
[00041962]Packet upgrade failed at version checking.

[00015255]========== remo-con disconnect. boot(15) ============
[00015295]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015333]Packet upgrade start...

[00015378]Packet checking...
[00015424]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015465]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015505]Done.

[00015547]Version checking[1]...
[00015639][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015843][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015897][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015958][09 00][00] v1.7.0.3 -> v1.7.0.3
[00016078][11 00][00] v1.7.0.0 -> v1.7.0.0
[00016173][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016288][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016399][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016488][12 03][00] v1.10.0.0 -> v1.10.0.0
[00029030][15 00][00] device not detected.
[00029130][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029268][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029339][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029381][01 00][00] v1.23.3419 -> v1.23.3419
[00029430][01 01][00] v1.23.3419 -> v1.23.3419
[00041973][08 00][00] device not detected.
[00042018]Packet upgrade failed at version checking.

[00015030]========== remo-con disconnect. boot(15) ============
[00015081]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015123]Packet upgrade start...

[00015168]Packet checking...
[00015212]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015264]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015306]Done.

[00015346]Version checking[1]...
[00015431][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015506][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015552][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015615][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015731][11 00][00] v1.7.0.0 -> v1.7.0.0
[00015819][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015916][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015995][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016085][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028628][15 00][00] device not detected.
[00028716][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028846][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028916][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028965][01 00][00] v1.23.3419 -> v1.23.3419
[00029006][01 01][00] v1.23.3419 -> v1.23.3419
[00041548][08 00][00] device not detected.
[00041588]Packet upgrade failed at version checking.

[00015047]========== remo-con disconnect. boot(15) ============
[00015093]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015235]Packet upgrade start...

[00015287]Packet checking...
[00015331]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015374]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015422]Done.

[00015465]Version checking[1]...
[00015543][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015628][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015677][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015727][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015848][11 00][00] v1.7.0.0 -> v1.7.0.0
[00015937][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016037][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016137][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016236][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028789][15 00][00] device not detected.
[00028894][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029037][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029088][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029137][01 00][00] v1.23.3419 -> v1.23.3419
[00029179][01 01][00] v1.23.3419 -> v1.23.3419
[00041725][08 00][00] device not detected.
[00041779]Packet upgrade failed at version checking.

[00015064]========== remo-con disconnect. boot(15) ============
[00015112]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015155]Packet upgrade start...

[00015200]Packet checking...
[00015251]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015293]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015336]Done.

[00015379]Version checking[1]...
[00015465][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015546][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015600][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015669][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015786][11 00][00] v1.7.0.0 -> v1.7.0.0
[00015884][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015984][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016085][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016184][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028733][15 00][00] device not detected.
[00028840][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028980][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029171][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029214][01 00][00] v1.23.3419 -> v1.23.3419
[00029265][01 01][00] v1.23.3419 -> v1.23.3419
[00041809][08 00][00] device not detected.
[00041854]Packet upgrade failed at version checking.

[00015051]========== remo-con disconnect. boot(15) ============
[00015099]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015144]Packet upgrade start...

[00015189]Packet checking...
[00015235]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015290]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015334]Done.

[00015378]Version checking[1]...
[00015463][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015543][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015596][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015667][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015783][11 00][00] v1.7.0.0 -> v1.7.0.0
[00015877][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015977][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016078][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016177][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028733][15 00][00] device not detected.
[00028838][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028978][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029049][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029093][01 00][00] v1.23.3419 -> v1.23.3419
[00029144][01 01][00] v1.23.3419 -> v1.23.3419
[00041688][08 00][00] device not detected.
[00041730]Packet upgrade failed at version checking.

[00015068]========== remo-con disconnect. boot(15) ============
[00015120]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015167]Packet upgrade start...

[00015216]Packet checking...
[00015266]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015313]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015357]Done.

[00015399]Version checking[1]...
[00015488][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015568][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015637][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015697][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015813][11 00][00] v1.7.0.0 -> v1.7.0.0
[00016001][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016101][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016181][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016301][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028847][15 00][00] device not detected.
[00028937][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029060][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029137][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029180][01 00][00] v1.23.3419 -> v1.23.3419
[00029227][01 01][00] v1.23.3419 -> v1.23.3419
[00041777][08 00][00] device not detected.
[00041828]Packet upgrade failed at version checking.

[00015457]========== remo-con disconnect. boot(15) ============
[00015504]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x01e8f569].
[00015558]Packet upgrade start...

[00015605]Packet checking...
[00015662]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015710]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015757]Done.

[00015803]Version checking[1]...
[00015884][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015963][03 06][00] v2.3.0.13 -> v2.3.0.13
[00016031][04 00][00] v1.41.0.0 -> v1.41.0.0
[00016093][09 00][00] v1.7.0.3 -> v1.7.0.3
[00016229][11 00][00] v1.7.0.0 -> v1.7.0.0
[00016319][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016392][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016472][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016572][12 03][00] v1.10.0.0 -> v1.10.0.0
[00029127][15 00][00] device not detected.
[00029213][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029337][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029394][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029440][01 00][00] v1.23.3419 -> v1.23.3419
[00029489][01 01][00] v1.23.3419 -> v1.23.3419
[00042041][08 00][00] device not detected.
[00042086]Packet upgrade failed at version checking.

[00015149]========== remo-con disconnect. boot(15) ============
[00015204]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x01e8f569].
[00015251]Packet upgrade start...

[00015303]Packet checking...
[00015355]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015400]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015569]Done.

[00015618]Version checking[1]...
[00015690][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015770][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015839][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015919][09 00][00] v1.7.0.3 -> v1.7.0.3
[00016050][11 00][00] v1.7.0.0 -> v1.7.0.0
[00016144][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016244][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016344][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016444][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028995][15 00][00] device not detected.
[00029100][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029214][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029280][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029335][01 00][00] v1.23.3419 -> v1.23.3419
[00029386][01 01][00] v1.23.3419 -> v1.23.3419
[00041942][08 00][00] device not detected.
[00041994]Packet upgrade failed at version checking.

[00015235]========== remo-con disconnect. boot(15) ============
[00015285]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00015336]Packet upgrade start...

[00015394]Packet checking...
[00015445]Packet vlink 01.04.0010 <-> 01.03.0020.
[00015493]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015545]Done.

[00015592]Version checking[1]...
[00015695][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015774][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015839][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015913][09 00][00] v1.7.0.3 -> v1.7.0.3
[00016036][11 00][00] v1.7.0.0 -> v1.7.0.0
[00016123][12 00][00] v1.10.0.0 -> v1.10.0.0
[00016224][12 01][00] v1.10.0.0 -> v1.10.0.0
[00016324][12 02][00] v1.10.0.0 -> v1.10.0.0
[00016424][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028971][15 00][00] device not detected.
[00029084][17 00][00] v1.1.1.7 -> v1.1.1.7
[00029226][17 01][00] v1.0.2.7 -> v1.0.2.7
[00029295][19 00][00] v1.0.8.96 -> v1.0.8.96
[00029343][01 00][00] v1.23.3419 -> v1.23.3419
[00029396][01 01][00] v1.23.3419 -> v1.23.3419
[00041943][08 00][00] device not detected.
[00041991]Packet upgrade failed at version checking.

[00014693]========== 2015.11.15 14:56:49. boot(15) ============
[00014762]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x28506e34].
[00014808]Packet upgrade start...

[00014865]Packet checking...
[00014914]Packet vlink 01.04.0010 <-> 01.03.0020.
[00014970]Record vlink 01.03.0020 <-> 01.01.0009 (flow = 0).
[00015019]Done.

[00015074]Version checking[1]...
[00015164][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015241][03 06][00] v2.3.0.13 -> v2.3.0.13
[00015307][04 00][00] v1.41.0.0 -> v1.41.0.0
[00015370][09 00][00] v1.7.0.3 -> v1.7.0.3
[00015481][11 00][00] v1.7.0.0 -> v1.7.0.0
[00015575][12 00][00] v1.10.0.0 -> v1.10.0.0
[00015681][12 01][00] v1.10.0.0 -> v1.10.0.0
[00015775][12 02][00] v1.10.0.0 -> v1.10.0.0
[00015881][12 03][00] v1.10.0.0 -> v1.10.0.0
[00028432][15 00][00] device not detected.
[00028530][17 00][00] v1.1.1.7 -> v1.1.1.7
[00028658][17 01][00] v1.0.2.7 -> v1.0.2.7
[00028735][19 00][00] v1.0.8.96 -> v1.0.8.96
[00028788][01 00][00] v1.23.3419 -> v1.23.3419
[00028845][01 01][00] v1.23.3419 -> v1.23.3419
[00041394][08 00][00] device not detected.
[00041441]Packet upgrade failed at version checking.

作者: zeldella 时间: 2015-11-15

========== 2015.08.28 13:35:41 =====================
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2015.11.15 12:16:50 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2015.11.15 14:56:48 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

作者: lke10 时间: 2015-11-16
检查云台的两根线有没有松动，退出APP从新启动飞行器再试！！

欢迎光临大疆社区 (https://bbs.dji.com/)