大疆社区

标题: 27日发布的BUGFIX的80固件刷不进去。 [打印本页]

作者: lingyun8850    时间: 2015-12-29
标题: 27日发布的BUGFIX的80固件刷不进去。
如果在25号已经刷过80固件的话,那么27号新发布的BUGFIX的80固件是无法刷进去的。
========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: OSMO_FW_V01.02.01.60.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: OSMO_FW_V01.04.01.80.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: OSMO_FW_V01.04.01.80.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.12.25 22:49:09 =====================

========== 2015.12.25 22:49:19 =====================
Packet: OSMO_FW_V01.04.01.80.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.12.25 22:51:05 =====================
Packet: OSMO_FW_V01.04.01.80.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: OSMO_FW_V01.04.01.80.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.12.25 23:09:04 =====================
Packet: OSMO_FW_V01.04.01.80.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: OSMO_FW_V01.04.01.80.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:09 remo-con disconnect======
Packet: OSMO_FW_V01.04.01.80.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.



作者: 秋香    时间: 2015-12-29
25日已经更新的亲们就不要再继续升级了,25日的固件更新后就是最新的。




欢迎光临 大疆社区 (https://bbs.dji.com/) Powered by Discuz! X3.2