大疆社区

标题: 精灵准备启航 [打印本页]

作者: 小韓 时间: 2016-8-18
标题: 精灵准备启航
[{"nameindex":"_2_167600","type":2,"imgsrc":"","multi_size":{"small":"201608/18/162930g8mtzzmaoynkz6ms.jpeg@!550","large":"201608/18/162930g8mtzzmaoynkz6ms.jpeg@!1920","extra_large":"201608/18/162930g8mtzzmaoynkz6ms.jpeg@!2560","wide_450_360":"201608/18/162930g8mtzzmaoynkz6ms.jpeg@!450x360","medium":"201608/18/162930g8mtzzmaoynkz6ms.jpeg@!1200","square_360_360":"201608/18/162930g8mtzzmaoynkz6ms.jpeg@!360x360","standard_640_360":"201608/18/162930g8mtzzmaoynkz6ms.jpeg@!640x360"},"url":"201608/18/162930g8mtzzmaoynkz6ms.jpeg","desc":""},{"nameindex":"_1_1","type":1,"imgsrc":"","url":"","desc":"趁着这晴空万里，碧波荡漾的大海，起飞拉锯拍小岛"}]

作者: 收3坏电Q233517377 时间: 2016-8-18
老大能不能飞回来发美图。。。。起飞的图就别了吧不怎么向往

作者: 石榴姐 时间: 2016-8-18
坐等楼主大片

作者: 飞去来器 时间: 2016-8-18

石榴姐发表于 2016-8-18 16:42
坐等楼主大片

升级不成功请看看log

作者: 飞去来器 时间: 2016-8-18

石榴姐发表于 2016-8-18 16:42
坐等楼主大片

62]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012619]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012670]Done.

[00012721]Version checking[1]...
[00012812][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012912][03 06][00] v2.4.20.18 -> v2.4.20.18
[00012973][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013197][11 00][00] v2.0.0.32 -> v1.8.0.0, firmware v2.0.0.32 not support.
[00013254][11 00][00] v2.0.0.32 -> v1.8.0.0
[00013373][11 01][00] v2.0.0.32 -> v2.0.0.33 need upgrade.
[00013486][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013598][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013700][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013807][12 03][00] v1.10.0.0 -> v1.10.0.0
[00044364][15 00][00] device not detected.
[00044463][17 00][00] v1.1.1.7 -> v1.1.1.7
[00044603][17 01][00] v1.0.2.7 -> v1.0.2.7
[00044682][19 00][00] v255.255.255.254 -> v1.0.8.96
[00044729][01 00][00] v1.23.4920 -> v1.23.4920
[00044781][01 01][00] v1.23.4920 -> v1.23.4920
[00044858][09 00][00] v3.0.0.10 -> v3.0.0.10
[00044909]Done.

[00046957]Waiting for user confirm...
[00057014]Timeout, start upgrade automatically.

[00057124]Firmware upgrading[1]...
[00057195][11 01] Firmware upgrade start...
[00114033][11 01] Firmware upgrade finished successfully.
[00114094]Done.

[00114148]Version checking[2]...
[00114238][03 05][00] v34.2.0.9 -> v34.2.0.9
[00114318][03 06][00] v2.4.20.18 -> v2.4.20.18
[00114371][04 00][00] v1.44.0.0 -> v1.44.0.0
[00114525][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00114582][11 00][00] v2.0.0.33 -> v1.8.0.0
[00114704][11 01][05] v2.0.0.33 -> v2.0.0.33
[00114958][12 00][00] v1.10.0.0 -> v1.10.0.0
[00115052][12 01][00] v1.10.0.0 -> v1.10.0.0
[00115147][12 02][00] v1.10.0.0 -> v1.10.0.0
[00115252][12 03][00] v1.10.0.0 -> v1.10.0.0
[00147801][15 00][00] device not detected.
[00147917][17 00][00] v1.1.1.7 -> v1.1.1.7
[00148056][17 01][00] v1.0.2.7 -> v1.0.2.7
[00148125][19 00][00] v255.255.255.254 -> v1.0.8.96
[00148179][01 00][00] v1.23.4920 -> v1.23.4920
[00148232][01 01][00] v1.23.4920 -> v1.23.4920
[00148304][09 00][00] v3.0.0.10 -> v3.0.0.10
[00148361]Packet upgrade failed at version checking.

[00012757]========== remo-con disconnect. boot(15) ============
[00012807]Packet [C:\P3S_FW_V01.09.0060.bin] detected, card sn [0xda5c58b7].
[00012870]Packet upgrade start...

[00012927]Packet checking...
[00012979]Packet vlink 01.09.0060 <-> 01.08.0080.
[00013037]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00013090]Done.

[00013143]Version checking[1]...
[00013238][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013332][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013390][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013494][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00013543][11 00][00] v2.0.0.33 -> v1.8.0.0
[00013672][11 01][00] v2.0.0.33 -> v2.0.0.33
[00013772][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013889][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013994][12 02][00] v1.10.0.0 -> v1.10.0.0
[00014089][12 03][00] v1.10.0.0 -> v1.10.0.0
[00046643][15 00][00] device not detected.
[00046763][17 00][00] v1.1.1.7 -> v1.1.1.7
[00046904][17 01][00] v1.0.2.7 -> v1.0.2.7
[00046979][19 00][00] v255.255.255.254 -> v1.0.8.96
[00047038][01 00][00] v1.23.4920 -> v1.23.4920
[00047091][01 01][00] v1.23.4920 -> v1.23.4920
[00047160][09 00][00] v3.0.0.10 -> v3.0.0.10
[00047213]Packet upgrade failed at version checking.

[00012027]========== remo-con disconnect. boot(15) ============
[00012080]Packet [C:\P3S_FW_V01.09.0060.bin] detected, card sn [0x29a17d0a].
[00012129]Packet upgrade start...

[00012297]Packet checking...
[00012362]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012417]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012468]Done.

[00012529]Version checking[1]...
[00012618][03 05][00] v34.2.0.9 -> v34.2.0.9
[00012718][03 06][00] v2.4.20.18 -> v2.4.20.18
[00012790][04 00][00] v1.44.0.0 -> v1.44.0.0
[00012918][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00012980][11 00][00] v2.0.0.33 -> v1.8.0.0
[00013078][11 01][00] v2.0.0.33 -> v2.0.0.33
[00013187][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013287][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013419][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013526][12 03][00] v1.10.0.0 -> v1.10.0.0
[00044087][15 00][00] device not detected.
[00044184][17 00][00] v1.1.1.7 -> v1.1.1.7
[00044309][17 01][00] v1.0.2.7 -> v1.0.2.7
[00044381][19 00][00] v255.255.255.254 -> v1.0.8.96
[00044426][01 00][00] v1.23.4920 -> v1.23.4920
[00044474][01 01][00] v1.23.4920 -> v1.23.4920
[00044560][09 00][00] v3.0.0.10 -> v3.0.0.10
[00044608]Packet upgrade failed at version checking.

[00012481]========== remo-con disconnect. boot(15) ============
[00012532]Packet [C:\P3S_FW_V01.09.0060.bin] detected, card sn [0xda5c58b7].
[00012591]Packet upgrade start...

[00012649]Packet checking...
[00012698]Packet vlink 01.09.0060 <-> 01.08.0080.
[00012759]Record vlink 01.08.0080 <-> 01.07.0060 (flow = 0).
[00012813]Done.

[00012863]Version checking[1]...
[00012955][03 05][00] v34.2.0.9 -> v34.2.0.9
[00013049][03 06][00] v2.4.20.18 -> v2.4.20.18
[00013103][04 00][00] v1.44.0.0 -> v1.44.0.0
[00013220][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00013273][11 00][00] v2.0.0.33 -> v1.8.0.0
[00013400][11 01][00] v2.0.0.33 -> v2.0.0.33
[00013496][12 00][00] v1.10.0.0 -> v1.10.0.0
[00013612][12 01][00] v1.10.0.0 -> v1.10.0.0
[00013716][12 02][00] v1.10.0.0 -> v1.10.0.0
[00013812][12 03][00] v1.10.0.0 -> v1.10.0.0
[00044370][15 00][00] device not detected.
[00044608][17 00][00] v1.1.1.7 -> v1.1.1.7
[00044747][17 01][00] v1.0.2.7 -> v1.0.2.7
[00044809][19 00][00] v255.255.255.254 -> v1.0.8.96
[00044862][01 00][00] v1.23.4920 -> v1.23.4920
[00044923][01 01][00] v1.23.4920 -> v1.23.4920
[00045009][09 00][00] v3.0.0.10 -> v3.0.0.10
[00045062]Packet upgrade failed at version checking.

作者: 2674561883 时间: 2016-8-20
.bin文件没过检测

欢迎光临大疆社区 (https://bbs.dji.com/)