求助：精灵3S升级失败

求助：精灵3S升级失败

[00362125]========== 2016.12.18 17:02:02. boot(15) ============
[00362251]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x248542cf].
[00362281]Packet upgrade start...

[00362316]Packet checking...
[00362357]Packet vlink 01.07.0090 <-> 01.06.0080.
[00362424]Done.

[00362458]Version checking[1]...
[00362492][01 00][00] v1.14.4920 -> v1.14.4920
[00362532][01 01][00] v1.14.4920 -> v1.14.4920
[00362583][04 00][00] v1.51.0.0 -> v1.51.0.0
[00362660][03 05][00] v34.2.0.9 -> v34.2.0.9
[00362738][03 06][00] v2.4.20.22 -> v2.4.15.5
[00362804][09 00][00] v0.1.0.9 -> v0.1.1.0 need upgrade.
[00362886][12 00][00] v5.9.0.0 -> v5.9.0.0
[00362975][12 01][00] v5.9.0.0 -> v5.9.0.0
[00363081][12 02][00] v5.9.0.0 -> v5.9.0.0
[00363178][12 03][00] v5.9.0.0 -> v5.9.0.0
[00363277][11 00][00] v2.0.0.32 -> v1.8.0.0, firmware v2.0.0.32 not support.
[00363310][11 00][00] v2.0.0.32 -> v1.8.0.0
[00363438][11 01][00] v2.0.0.32 -> v2.0.0.33 need upgrade.
[00363472]Done.

[00365511]Waiting for user confirm...
[00375550]Timeout, start upgrade automatically.

[00375619]Firmware upgrading[1]...
[00375664][11 01] Firmware upgrade start...
[00436789][11 01] Firmware upgrade finished successfully.
[00436847][09 00] Firmware upgrade start...
[00462709][09 00] Firmware upgrade finish without reboot.
[00492746][09 00] Firmware upgrade finished successfully.
[00492778]Done.

[00492816]Version checking[2]...
[00492851][01 00][00] v1.14.4920 -> v1.14.4920
[00492886][01 01][00] v1.14.4920 -> v1.14.4920
[00492927][04 00][00] v1.51.0.0 -> v1.51.0.0
[00493058][03 05][00] v34.2.0.9 -> v34.2.0.9
[00493114][03 06][00] v2.4.20.22 -> v2.4.15.5
[00493192][09 00][05] v0.1.1.0 -> v0.1.1.0
[00493267][12 00][00] v5.9.0.0 -> v5.9.0.0
[00493352][12 01][00] v5.9.0.0 -> v5.9.0.0
[00493426][12 02][00] v5.9.0.0 -> v5.9.0.0
[00493543][12 03][00] v5.9.0.0 -> v5.9.0.0
[00493654][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00493687][11 00][00] v2.0.0.33 -> v1.8.0.0
[00493913][11 01][05] v2.0.0.33 -> v2.0.0.33
[00493949]Packet upgrade finish successfully.

[00106079]========== 2017.01.25 20:02:13. boot(15) ============
[00106114]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x248542cf].
[00106152]Packet upgrade start...

[00106196]Packet checking...
[00106230]Packet vlink 01.08.0100 <-> 01.07.0090.
[00106262]Record vlink 01.07.0090 <-> 01.06.0080 (flow = 0).
[00106297]Done.

[00106333]Version checking[1]...
[00106377][01 00][00] v1.14.4920 -> v1.14.4920
[00106414][01 01][00] v1.14.4920 -> v1.14.4920
[00106455][04 00][00] v1.51.0.0 -> v1.51.0.0
[00106532][03 05][00] v34.2.0.9 -> v34.2.0.9
[00106609][03 06][00] v2.4.20.22 -> v2.4.20.28 need upgrade.
[00106677][09 00][00] v0.1.1.0 -> v0.1.1.0
[00106771][12 00][00] v5.9.0.0 -> v5.9.0.0
[00106868][12 01][00] v5.9.0.0 -> v5.9.0.0
[00106955][12 02][00] v5.9.0.0 -> v5.9.0.0
[00107049][12 03][00] v5.9.0.0 -> v5.9.0.0
[00107177][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00107214][11 00][00] v2.0.0.33 -> v1.8.0.0
[00107308][11 01][00] v2.0.0.33 -> v2.0.0.33
[00107351]Done.

[00109383]Waiting for user confirm...
[00119418]Timeout, start upgrade automatically.

[00119489]Firmware upgrading[1]...
[00119768][03 06] Firmware upgrade start...
[00516194][03 06] Firmware upgrade finished successfully.
[00516227]Done.

[00516263]Version checking[2]...
[00516300][01 00][00] v1.14.4920 -> v1.14.4920
[00516338][01 01][00] v1.14.4920 -> v1.14.4920
[00516381][04 00][00] v1.51.0.0 -> v1.51.0.0
[00516465][03 05][00] v34.2.0.9 -> v34.2.0.9
[00516549][03 06][05] v2.4.20.28 -> v2.4.20.28
[00516605][09 00][00] v0.1.1.0 -> v0.1.1.0
[00516692][12 00][00] v5.9.0.0 -> v5.9.0.0
[00516781][12 01][00] v5.9.0.0 -> v5.9.0.0
[00516855][12 02][00] v5.9.0.0 -> v5.9.0.0
[00516958][12 03][00] v5.9.0.0 -> v5.9.0.0
[00517048][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00517088][11 00][00] v2.0.0.33 -> v1.8.0.0
[00517188][11 01][00] v2.0.0.33 -> v2.0.0.33
[00517308]Packet upgrade finish successfully.

[00510078]========== 2017.08.07 19:58:44. boot(2) ============
[00510111]Packet [C:\P3C_FW_V99.99.9999.bin] detected, card sn [0x248542cf].
[00510155]Packet upgrade start...

[00510193]Packet checking...
[00510231]Packet vlink 01.09.0200 <-> 00.00.0000.
[00510264]Record vlink 01.08.0100 <-> 01.07.0090 (flow = 0).
[00510301]Done.

[00510337]Version checking[1]...
[00510424][03 06][00] v2.4.20.28 -> v2.4.20.50 need upgrade.
[00510485][09 00][00] v0.1.1.0 -> v0.1.1.1 need upgrade.
[00510521]Done.

[00512559]Waiting for user confirm...
[00522597]Timeout, start upgrade automatically.

[00522675]Firmware upgrading[1]...
[00522997][03 06] Firmware upgrade start...
[00916504][03 06] Firmware upgrade finished successfully.
[00916564][09 00] Firmware upgrade start...
[00959533][09 00] Firmware upgrade finish without reboot.
[00989574][09 00] Firmware upgrade finished successfully.
[00989613]Done.

[00989649]Version checking[2]...
[00989736][03 06][05] v2.4.20.50 -> v2.4.20.50
[00989797][09 00][05] v0.1.1.1 -> v0.1.1.1
[00989834]Packet upgrade finish successfully.

[00016617]========== remo-con disconnect. boot(15) ============
[00016652]Packet [C:\P3C_FW_V01.09.0200.bin] detected, card sn [0x15bdf7cf].
[00016686]Packet upgrade start...

[00016726]Packet upgrade failed at packet checking.

[00016308]========== remo-con disconnect. boot(15) ============
[00016346]Packet [C:\P3C_FW_V01.09.0200.bin] detected, card sn [0x15bdf7cf].
[00016379]Packet upgrade start...

[00016500]Packet upgrade failed at packet checking.

[00016530]========== remo-con disconnect. boot(15) ============
[00016633]Packet [C:\P3C_FW_V01.09.0200.bin] detected, card sn [0x15bdf7cf].
[00016667]Packet upgrade start...

[00016705]Packet checking...
[00016741]Packet vlink 01.09.0200 <-> 00.00.0000.
[00016775]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 0).
[00016808]Done.

[00016940]Version checking[1]...
[00016984][04 00][00] v1.51.0.0 -> v1.51.0.0
[00017179][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00017214][11 00][00] v2.0.0.33 -> v1.8.0.0
[00017319][11 01][00] v2.0.0.33 -> v2.0.0.33
[00017363][01 00][00] v1.14.4920 -> v1.14.4920
[00017400][01 01][00] v1.14.4920 -> v1.14.4920
[00017500][03 05][00] v34.2.0.9 -> v34.2.0.9
[00017579][03 06][00] v2.4.20.50 -> v2.4.20.50
[00030114][07 00][00] device not detected.
[00030186][09 00][00] v0.1.1.1 -> v0.1.1.1
[00030268][12 00][00] v5.9.0.0 -> v5.9.0.0
[00030364][12 01][00] v5.9.0.0 -> v5.9.0.0
[00030546][12 02][00] v5.9.0.0 -> v5.9.0.0
[00030640][12 03][00] v5.9.0.0 -> v5.9.0.0
[00030674]Packet upgrade failed at version checking.
[00019389]========== remo-con disconnect. boot(15) ============
[00019503]Packet [C:\P3C_FW_V01.03.0050.bin] detected, card sn [0x000014e9].
[00019546]Packet upgrade start...

[00019590]Packet checking...
[00019640]Packet vlink 01.03.0050 <-> 01.02.0040.
[00019681]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00019721]Done.

[00019765]Version checking[1]...
[00019813][04 00][00] v1.51.0.0 -> v1.41.0.0
[00019942][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00019983][11 00][00] v2.0.0.33 -> v1.8.0.0
[00020023][01 00][00] v1.14.4920 -> v1.13.4312 need upgrade
[00020071][01 01][00] v1.14.4920 -> v1.13.4312 need upgrade
[00020167][03 05][00] v34.2.0.9 -> v34.2.0.9
[00020251][03 06][00] v2.4.20.50 -> v2.4.10.7 need upgrade.
[00032791][07 00][00] device not detected.
[00032853][09 00][00] v0.1.1.1 -> v0.1.1.0 need upgrade.
[00032943][12 00][00] v5.9.0.0 -> v5.9.0.0
[00033028][12 01][00] v5.9.0.0 -> v5.9.0.0
[00033126][12 02][00] v5.9.0.0 -> v5.9.0.0
[00033249][12 03][00] v5.9.0.0 -> v5.9.0.0
[00033290]Done.

[00035331]Waiting for user confirm...
[00045374]Timeout, start upgrade automatically.

[00045457]Firmware upgrading[1]...
[00045652][01 01] Firmware upgrade start...
[00075977][01 01] Firmware upgrade finished successfully.
[00076297][03 06] Firmware upgrade start...
[00486073][03 06] Firmware upgrade finished successfully.
[00486522][09 00] Firmware upgrade start...
[00517729][09 00] Firmware upgrade finish without reboot.
[00547770][09 00] Firmware upgrade finished successfully.
[00547811]Done.

[00547851]Version checking[2]...
[00547898][04 00][00] v1.51.0.0 -> v1.41.0.0
[00548083][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00548124][11 00][00] v2.0.0.33 -> v1.8.0.0
[00548168][01 00][00] v1.14.4920 -> v1.13.4312 need upgrade
[00548210][01 01][05] v1.13.4312 -> v1.13.4312
[00548284][03 05][00] v34.2.0.9 -> v34.2.0.9
[00548363][03 06][05] v2.4.10.7 -> v2.4.10.7
[00560909][07 00][00] device not detected.
[00560991][09 00][05] v0.1.1.0 -> v0.1.1.0
[00561173][12 00][00] v5.9.0.0 -> v5.9.0.0
[00561250][12 01][00] v5.9.0.0 -> v5.9.0.0
[00561337][12 02][00] v5.9.0.0 -> v5.9.0.0
[00561411][12 03][00] v5.9.0.0 -> v5.9.0.0
[00561454]Packet upgrade failed at version checking.
[00014274]========== remo-con disconnect. boot(15) ============
[00014325]Packet [C:\P3C_FW_V01.04.0060.bin] detected, card sn [0xb1ce9207].
[00014370]Packet upgrade start...

[00014427]Packet checking...
[00014475]Packet vlink 01.04.0060 <-> 01.03.0050.
[00014521]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00014566]Done.

[00014612]Version checking[1]...
[00014662][04 00][00] v1.51.0.0 -> v1.41.0.0
[00014771][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00014814][11 00][00] v2.0.0.33 -> v1.8.0.0
[00014932][11 01][00] v2.0.0.33 -> v2.0.0.32
[00014979][01 00][00] v1.14.4920 -> v1.14.4920
[00015025][01 01][00] v1.14.4920 -> v1.14.4920
[00015114][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015212][03 06][00] v2.4.20.50 -> v2.4.13.0 need upgrade.
[00027759][07 00][00] device not detected.
[00027827][09 00][00] v0.1.1.1 -> v0.1.1.0 need upgrade.
[00027932][12 00][00] v5.9.0.0 -> v5.9.0.0
[00028051][12 01][00] v5.9.0.0 -> v5.9.0.0
[00028138][12 02][00] v5.9.0.0 -> v5.9.0.0
[00028240][12 03][00] v5.9.0.0 -> v5.9.0.0
[00028283]Done.

[00030338]Waiting for user confirm...
[00040381]Timeout, start upgrade automatically.

[00040480]Firmware upgrading[1]...
[00040733][03 06] Firmware upgrade start...
[00435942][03 06] Firmware upgrade finished successfully.
[00436025][09 00] Firmware upgrade start...
[00467084][09 00] Firmware upgrade finish without reboot.
[00497132][09 00] Firmware upgrade finished successfully.
[00497182]Done.

[00497235]Version checking[2]...
[00497285][04 00][00] v1.51.0.0 -> v1.41.0.0
[00497400][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00497444][11 00][00] v2.0.0.33 -> v1.8.0.0
[00497561][11 01][00] v2.0.0.33 -> v2.0.0.32
[00497607][01 00][00] v1.14.4920 -> v1.14.4920
[00497659][01 01][00] v1.14.4920 -> v1.14.4920
[00497737][03 05][00] v34.2.0.9 -> v34.2.0.9
[00497820][03 06][05] v2.4.13.0 -> v2.4.13.0
[00510366][07 00][00] device not detected.
[00510436][09 00][05] v0.1.1.0 -> v0.1.1.0
[00510527][12 00][00] v5.9.0.0 -> v5.9.0.0
[00510626][12 01][00] v5.9.0.0 -> v5.9.0.0
[00510884][12 02][00] v5.9.0.0 -> v5.9.0.0
[00510979][12 03][00] v5.9.0.0 -> v5.9.0.0
[00511025]Packet upgrade failed at version checking.

[00014288]========== remo-con disconnect. boot(15) ============
[00014330]Packet [C:\P3C_FW_V01.05.0070.bin] detected, card sn [0xb1ce9207].
[00014380]Packet upgrade start...

[00014436]Packet checking...
[00014486]Packet vlink 01.05.0070 <-> 01.04.0060.
[00014529]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00014579]Done.

[00014623]Version checking[1]...
[00014677][04 00][00] v1.51.0.0 -> v1.44.0.0
[00014806][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00014858][11 00][00] v2.0.0.33 -> v1.8.0.0
[00014967][11 01][00] v2.0.0.33 -> v2.0.0.32
[00015013][01 00][00] v1.14.4920 -> v1.14.4920
[00015058][01 01][00] v1.14.4920 -> v1.14.4920
[00015149][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015232][03 06][00] v2.4.13.0 -> v2.4.14.5 need upgrade.
[00027785][07 00][00] device not detected.
[00027849][09 00][00] v0.1.1.0 -> v0.1.1.0
[00027954][12 00][00] v5.9.0.0 -> v5.9.0.0
[00028053][12 01][00] v5.9.0.0 -> v5.9.0.0
[00028157][12 02][00] v5.9.0.0 -> v5.9.0.0
[00028254][12 03][00] v5.9.0.0 -> v5.9.0.0
[00028307]Done.

[00030353]Waiting for user confirm...
[00040479]Timeout, start upgrade automatically.

[00040581]Firmware upgrading[1]...
[00040849][03 06] Firmware upgrade start...
[00437726][03 06] Firmware upgrade finished successfully.
[00437774]Done.

[00437819]Version checking[2]...
[00437872][04 00][00] v1.51.0.0 -> v1.44.0.0
[00437978][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00438024][11 00][00] v2.0.0.33 -> v1.8.0.0
[00438178][11 01][00] v2.0.0.33 -> v2.0.0.32
[00438224][01 00][00] v1.14.4920 -> v1.14.4920
[00438273][01 01][00] v1.14.4920 -> v1.14.4920
[00438361][03 05][00] v34.2.0.9 -> v34.2.0.9
[00438445][03 06][05] v2.4.14.5 -> v2.4.14.5
[00450991][07 00][00] device not detected.
[00451059][09 00][00] v0.1.1.0 -> v0.1.1.0
[00451157][12 00][00] v5.9.0.0 -> v5.9.0.0
[00451244][12 01][00] v5.9.0.0 -> v5.9.0.0
[00451339][12 02][00] v5.9.0.0 -> v5.9.0.0
[00451425][12 03][00] v5.9.0.0 -> v5.9.0.0
[00451472]Packet upgrade failed at version checking.

[00014296]========== remo-con disconnect. boot(15) ============
[00014350]Packet [C:\P3C_FW_V01.02.0040.bin] detected, card sn [0xb1ce9207].
[00014393]Packet upgrade start...

[00014455]Packet checking...
[00014504]Packet vlink 01.02.0040 <-> 01.01.0030.
[00014555]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00014600]Done.

[00014650]Version checking[1]...
[00014700][04 00][00] v1.51.0.0 -> v1.41.0.0
[00014831][11 00][00] v2.0.0.33 -> v1.7.0.0, firmware v2.0.0.33 not support.
[00014883][11 00][00] v2.0.0.33 -> v1.7.0.0
[00014930][01 00][00] v1.14.4920 -> v1.13.4312 need upgrade
[00014978][01 01][00] v1.14.4920 -> v1.13.4312 need upgrade
[00015068][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015145][03 06][00] v2.4.14.5 -> v2.4.0.5
[00027692][07 00][00] device not detected.
[00027769][09 00][00] v0.1.1.0 -> v0.1.0.9 need upgrade.
[00027861][12 00][00] v5.9.0.0 -> v5.9.0.0
[00027969][12 01][00] v5.9.0.0 -> v5.9.0.0
[00028048][12 02][00] v5.9.0.0 -> v5.9.0.0
[00028153][12 03][00] v5.9.0.0 -> v5.9.0.0
[00028307]Done.

[00030362]Waiting for user confirm...
[00040410]Timeout, start upgrade automatically.

[00040512]Firmware upgrading[1]...
[00040689][01 01] Firmware upgrade start...
[00071025][01 01] Firmware upgrade finished successfully.
[00071110][09 00] Firmware upgrade start...
[00107535][09 00] Firmware upgrade finish without reboot.
[00137585][09 00] Firmware upgrade finished successfully.
[00137641]Done.

[00137687]Version checking[2]...
[00137754][04 00][00] v1.51.0.0 -> v1.41.0.0
[00137865][11 00][00] v2.0.0.33 -> v1.7.0.0, firmware v2.0.0.33 not support.
[00137913][11 00][00] v2.0.0.33 -> v1.7.0.0
[00137963][01 00][00] v1.14.4920 -> v1.13.4312 need upgrade
[00138011][01 01][05] v1.13.4312 -> v1.13.4312
[00138110][03 05][00] v34.2.0.9 -> v34.2.0.9
[00138229][03 06][00] v2.4.14.5 -> v2.4.0.5
[00150778][07 00][00] device not detected.
[00150843][09 00][05] v0.1.0.9 -> v0.1.0.9
[00150949][12 00][00] v5.9.0.0 -> v5.9.0.0
[00151027][12 01][00] v5.9.0.0 -> v5.9.0.0
[00151134][12 02][00] v5.9.0.0 -> v5.9.0.0
[00151231][12 03][00] v5.9.0.0 -> v5.9.0.0
[00151279]Packet upgrade failed at version checking.

[00014304]========== remo-con disconnect. boot(15) ============
[00014357]Packet [C:\P3C_FW_V01.00.0020.bin] detected, card sn [0xb1ce9207].
[00014404]Packet upgrade start...

[00014462]Packet checking...
[00014513]Packet vlink 01.00.0020 <-> 01.00.0020.
[00014563]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00014610]Done.

[00014658]Version checking[1]...
[00014713][04 00][00] v1.51.0.0 -> v1.40.0.0
[00014849][11 00][00] v2.0.0.33 -> v1.7.0.0, firmware v2.0.0.33 not support.
[00014895][11 00][00] v2.0.0.33 -> v1.7.0.0
[00014945][01 00][00] v1.14.4920 -> v1.10.3548 need upgrade
[00014992][01 01][00] v1.13.4312 -> v1.10.3548 need upgrade
[00015087][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015164][03 06][00] v2.4.14.5 -> v2.2.6.34
[00027711][07 00][00] device not detected.
[00027786][09 00][00] v0.1.0.9 -> v0.1.0.4
[00027967][12 00][00] v5.9.0.0 -> v5.9.0.0
[00028045][12 01][00] v5.9.0.0 -> v5.9.0.0
[00028141][12 02][00] v5.9.0.0 -> v5.9.0.0
[00028227][12 03][00] v5.9.0.0 -> v5.9.0.0
[00028276]Done.

[00030330]Waiting for user confirm...
[00040380]Timeout, start upgrade automatically.

[00040489]Firmware upgrading[1]...
[00040661][01 01] Firmware upgrade start...
[00071000][01 01] Firmware upgrade finished successfully.
[00071048]Done.

[00071098]Version checking[2]...
[00071158][04 00][00] v1.51.0.0 -> v1.40.0.0
[00071259][11 00][00] v2.0.0.33 -> v1.7.0.0, firmware v2.0.0.33 not support.
[00071307][11 00][00] v2.0.0.33 -> v1.7.0.0
[00071358][01 00][00] v1.14.4920 -> v1.10.3548 need upgrade
[00071429][01 01][05] v1.10.3548 -> v1.10.3548
[00071527][03 05][00] v34.2.0.9 -> v34.2.0.9
[00071623][03 06][00] v2.4.14.5 -> v2.2.6.34
[00084182][07 00][00] device not detected.
[00084253][09 00][00] v0.1.0.9 -> v0.1.0.4
[00084352][12 00][00] v5.9.0.0 -> v5.9.0.0
[00084450][12 01][00] v5.9.0.0 -> v5.9.0.0
[00084555][12 02][00] v5.9.0.0 -> v5.9.0.0
[00084665][12 03][00] v5.9.0.0 -> v5.9.0.0
[00084720]Packet upgrade failed at version checking.

[00014636]========== remo-con disconnect. boot(15) ============
[00014680]Packet [C:\P3C_FW_V01.01.0030.bin] detected, card sn [0x7c703133].
[00014722]Packet upgrade start...

[00014773]Packet checking...
[00014815]Packet vlink 01.01.0030 <-> 01.00.0020.
[00014864]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00014906]Done.

[00014952]Version checking[1]...
[00014999][04 00][00] v1.51.0.0 -> v1.41.0.0
[00015121][11 00][00] v2.0.0.33 -> v1.7.0.0, firmware v2.0.0.33 not support.
[00015164][11 00][00] v2.0.0.33 -> v1.7.0.0
[00015207][01 00][00] v1.14.4920 -> v1.10.3548 need upgrade
[00015251][01 01][00] v1.10.3548 -> v1.10.3548
[00015341][03 05][00] v34.2.0.9 -> v34.2.0.9
[00015421][03 06][00] v2.4.14.5 -> v2.3.0.13
[00027965][07 00][00] device not detected.
[00028025][09 00][00] v0.1.0.9 -> v0.1.0.8
[00028205][12 00][00] v5.9.0.0 -> v5.9.0.0
[00028283][12 01][00] v5.9.0.0 -> v5.9.0.0
[00028366][12 02][00] v5.9.0.0 -> v5.9.0.0
[00028462][12 03][00] v5.9.0.0 -> v5.9.0.0
[00028505]Packet upgrade failed at version checking.
[00016469]========== remo-con disconnect. boot(15) ============
[00016519]Packet [C:\P3C_FW_V01.08.0100.bin] detected, card sn [0x000014e9].
[00016570]Packet upgrade start...

[00016630]Packet checking...
[00016681]Packet vlink 01.08.0100 <-> 01.07.0090.
[00016730]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00016782]Done.

[00016831]Version checking[1]...
[00016887][04 00][00] v1.51.0.0 -> v1.51.0.0
[00017011][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00017068][11 00][00] v2.0.0.33 -> v1.8.0.0
[00017179][11 01][00] v2.0.0.33 -> v2.0.0.33
[00017229][01 00][00] v1.14.4920 -> v1.14.4920
[00017279][01 01][00] v1.14.4920 -> v1.14.4920
[00017354][03 05][00] v34.2.0.9 -> v34.2.0.9
[00017432][03 06][00] v2.4.20.50 -> v2.4.20.28 need upgrade.
[00029988][07 00][00] device not detected.
[00030074][09 00][00] v0.1.1.1 -> v0.1.1.0 need upgrade.
[00030166][12 00][00] v5.9.0.0 -> v5.9.0.0
[00030419][12 01][00] v5.9.0.0 -> v5.9.0.0
[00030537][12 02][00] v5.9.0.0 -> v5.9.0.0
[00030634][12 03][00] v5.9.0.0 -> v5.9.0.0
[00030683]Done.

[00032731]Waiting for user confirm...
[00042783]Timeout, start upgrade automatically.

[00042884]Firmware upgrading[1]...
[00043328][03 06] Firmware upgrade start...
[00429832][03 06] Firmware upgrade finished successfully.
[00429908][09 00] Firmware upgrade st
[00016576]========== remo-con disconnect. boot(15) ============
[00016642]Packet [C:\P3C_FW_V01.07.0800.bin] detected, card sn [0x000014e9].
[00016701]Packet upgrade start...

[00016766]Packet checking...
[00016826]Packet vlink 01.07.0800 <-> 01.07.0090.
[00016887]Record vlink 01.09.0200 <-> 00.00.0000 (flow = 1).
[00016950]Done.

[00017010]Version checking[1]...
[00017084][04 00][00] v1.51.0.0 -> v1.51.0.0
[00017238][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00017296][11 00][00] v2.0.0.33 -> v1.8.0.0
[00017434][11 01][00] v2.0.0.33 -> v2.0.0.33
[00017499][01 00][00] v1.14.4920 -> v1.14.4920
[00017562][01 01][00] v1.14.4920 -> v1.14.4920
[00017658][03 05][00] v34.2.0.9 -> v34.2.0.9
[00017756][03 06][00] v2.4.20.50 -> v2.4.20.28 need upgrade.
[00030317][07 00][00] device not detected.
[00030412][09 00][00] v0.1.1.1 -> v0.1.1.0 need upgrade.
[00030520][12 00][00] v5.9.0.0 -> v5.9.0.0
[00030652][12 01][00] v5.9.0.0 -> v5.9.0.0
[00030755][12 02][00] v5.9.0.0 -> v5.9.0.0
[00030874][12 03][00] v5.9.0.0 -> v5.9.0.0
[00030943]Done.

[00033003]Waiting for user confirm...
[00043069]Timeout, start upgrade automatically.

[00043292]Firmware upgrading[1]...
[00043621][03 06] Firmware upgrade start...
[00433517][03 06] Firmware upgrade finished successfully.
[00433603][09 00] Firmware upgrade start...
[00459830][09 00] Firmware upgrade finish without reboot.
[00489894][09 00] Firmware upgrade finished successfully.
[00489958]Done.

[00490021]Version checking[2]...
[00490090][04 00][00] v1.51.0.0 -> v1.51.0.0
[00490272][11 00][00] v2.0.0.33 -> v1.8.0.0, firmware v2.0.0.33 not support.
[00490337][11 00][00] v2.0.0.33 -> v1.8.0.0
[00490455][11 01][00] v2.0.0.33 -> v2.0.0.33
[00490516][01 00][00] v1.14.4920 -> v1.14.4920
[00490579][01 01][00] v1.14.4920 -> v1.14.4920
[00490693][03 05][00] v34.2.0.9 -> v34.2.0.9
[00490812][03 06][05] v2.4.20.28 -> v2.4.20.28
[00503371][07 00][00] device not detected.
[00503462][09 00][05] v0.1.1.0 -> v0.1.1.0
[00503561][12 00][00] v5.9.0.0 -> v5.9.0.0
[00503673][12 01][00] v5.9.0.0 -> v5.9.0.0
[00503810][12 02][00] v5.9.0.0 -> v5.9.0.0
[00503936][12 03][00] v5.9.0.0 -> v5.9.0.0
[00503997]Packet upgrade failed at version checking.

楼主

精灵3标准版，线上升级后无图传，然后卡刷了n次，各种版本均升级失败
以上为log文件，其中省略了n次相似结果，除了1.7版本略有不同（不升级），其他都是升级失败，长滴音红灯常亮

冬瑞

楼主，您好，烦请选择我们官网自助寄修寄回，留下您的案例号给我，我们收到后会帮您检测看看具体原因哦。自助寄修地址看这里https://repair.dji.com/repair/index