楼主是从什么版本升级至什么版本呢？SD卡中的bin文件显示什么呢。

夏清 发表于 2015-7-14 16:36
楼主是从什么版本升级至什么版本呢？SD卡中的bin文件显示什么呢。

Result: Success.

========== 2015.07.12 13:51:40 =====================
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.07.12 19:11:49 =====================
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.07.13 10:36:52 =====================
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.07.13 10:50:32 remo-con disconnect======
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.07.13 10:56:08 =====================
Packet: P3S_FW_V01.02.0008.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.07.14 15:13:57 =====================
Packet: P3S_FW_V01.02.0008.bin

我昨天把无人机升好了，摇控器不行，
今天用无人机与摇控器用数据线连接也不成功之路，为什么呢。

您是从1.2.7升级至1.2.8么？此升级不涉及遥控器，您的遥控器版本已为最新，不需要进行升级。

夏清 发表于 2015-7-14 17:19
您是从1.2.7升级至1.2.8么？此升级不涉及遥控器，您的遥控器版本已为最新，不需要进行升级。 ...

感谢了，为什么遥控器还在提醒呢

bayboy 发表于 2015-7-14 17:30
感谢了，为什么遥控器还在提醒呢

请问遥控器是在APP中有报错么？提示什么呢