New firmware out for the Inspire 1--makes the X3 Inspire Camera compatible wi...

1) The X3 gimbal on the Inspire 1 is now compatible with the Osmo. Note that you must attach X3 gimbal to the Inspire 1 before updating the firmware.
2) Do not attach X3 gimbal to the Osmo to update the firmware.
3) Calibrate the Inspire 1 X3 gimbal when using it on the Osmo for the first time.
4) Only use Inspire 1 aircraft to update the Inspire 1 X3 gimbal. Do not use this firmware to update the Osmo gimbal.

Fly2014

zhe dou bei ni fa xian le

秋香

搜了一下楼主平常的回复，是会中文，不知道对悟新固件的发布记录是有什么疑问吗？如果要将白蛋放在osmo上使用，切记发布记录几点，先要在悟上升级新固件，然后再将白蛋使用到osmo，其次不要用悟的固件去升级osmo的黑蛋。

fxb624.sina

我有黑蛋一直在玩，没啥新功能，不用升级了！