那log文件在哪？

log文件中有具体的部位升级状况，如果是升级失败可以看出到底是哪里出了问题

啥叫log文件？txt里面不是日志吗?日志不就是log吗？清清

您发的是txt文件，不是log文件哈 问题解决就好

好了，你们不用管我了。 原来不需要升级的，我把x3插上去图传正常，拆下来再把x5插上去就正常了，两个相机显示版本号一样。

========== 2014.01.01 00:00:06 remo-con disconnect====== Packet: WM610_FC550_FW_V01.09.01.30_FCam.bin Upgrading ... Result: Success. ========== 2017.02.08 19:34:19 ===================== Packet: WM610_FC550_FW_V01.10.01.40.bin Upgrading ... Result: Failed. Reboot the aircraft and try to upgrade the firmware again. ========== 2017.02.08 19:42:18 ===================== Packet: WM610_FC550_FW_V01.10.01.40.bin Result: Failed. Reboot the aircraft and try to upgrade the firmware again. ========== 2017.02.08 19:45:29 ===================== Packet: WM610_FC550_FW_V01.10.01.40.bin Result: Failed. Reboot the aircraft and try to upgrade the firmware again. ========== 2017.02.08 19:48:12 ===================== Packet: WM610_FC550_FW_V01.10.01.40.bin Result: Failed. Reboot the aircraft and try to upgrade the firmware again. ========== 2017.02.08 19:54:52 ===================== Packet: WM610_FC550_FW_V01.09.01.30.bin Result: Failed. Reboot the aircraft and try to upgrade the firmware again. ========== 2017.02.08 20:10:24 ===================== Packet: WM610_FC550_FW_V01.10.01.40.bin Result: Failed. Reboot the aircraft and try to upgrade the firmware again.

log在2楼 夏清姑娘

是的，禅思x5，发布了两个固件我先后都试了。

您可以将升级log文件上传，我帮您看看 另外请问您有没有下对固件呢？