========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.10.01.40.bin
Upgrading ...
Result: Success.
========== 2014.01.01 00:00:05 remo-con disconnect======
Packet: WM610_FC550_FW_V01.10.01.40.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.11.01.50.bin
Upgrading ...
Result: Success.
========== 2017.08.20 11:58:26 =====================
Packet: WM610_FC550_FW_V01.11.01.50.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.
========== 2014.01.01 00:00:07 remo-con disconnect======
Packet: WM610_FC550_FW_V01.11.01.50.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.
========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.11.01.50.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.
升级完成后 的TXT 文本提示。。。。。。相机打开后正常(没有升空试验) 遥控器正常显示。
我当时是关闭了电源,不知道是不是因为这 后 三个失败文件 会不会影响 。。。照相机?