请选择 进入手机版 | 继续访问电脑版
正在上传图片(0/1)

悟1 v1.0 升级X5问题求助

 0
手机看帖 8 494
版主,我的悟1 v1.0 买了X5减震板装上,买了个二手X5镜头装上没传图,然后升级固件也没有成功,请问什么原因?

X5云台卖家发货时还检测过没问题的,装上没有图传,然后推测是要升级固件,先是下载了悟1pro的最新固件升级,声音提示是自检声音、升级进行中声音、升级失败声音。 然后致电客服重新下载正确的固件文件,然后都是“自检声音”“失败声音”

Log文件夹里面的WM610_FC550_FW_LOG_AB.txt如下


[00012710]========== remo-con disconnect. boot(15) ============
[00012833]Packet [C:\WM610_FC550_FW_V01.01.00.40_FCam.bin] detected, card sn [0x9b1161dd].
[00012871]Packet upgrade start...

[00012908]Packet checking...
[00012940]Packet vlink 01.01.0040 <-> 01.00.0030.
[00013007]Done.

[00013038]Version checking[1]...
[00013076][01 00][00] v0.34.3973 -> v1.7.4399 need upgrade
[00013106][01 01][00] v0.34.3973 -> v1.7.4399 need upgrade
[00013144][01 04][00] v0.1.3977 -> v0.2.4270 need upgrade
[00013184][04 00][00] v1.28.0.16 -> v1.28.0.15
[00013226][08 00][00] v2.14.9.17 -> v2.14.9.26 need upgrade.
[00013266]Done.

[00015298]Waiting for user confirm...
[00025328]Timeout, start upgrade automatically.

[00025400]Firmware upgrading[1]...
[00031061][01 00] Firmware upgrade start...
[00012240][01 00] Firmware upgrade finished successfully.
[00012272]Done.

[00012299]Packet [C:\WM610_FC550_FW_V01.01.00.40_FCam.bin] resumed, card sn [0x9b1161dd].
[00012341]Packet vlink 01.01.0040 <-> 01.00.0030.
[00012406]Version checking[2]...
[00012439][01 00][05] v1.7.4399 -> v1.7.4399
[00012468][01 01][00] v0.34.3973 -> v1.7.4399 need upgrade
[00012507][01 04][00] v0.1.3977 -> v0.2.4270 need upgrade
[00012545][04 00][00] v1.28.0.16 -> v1.28.0.15
[00012585][08 00][00] v2.14.9.17 -> v2.14.9.26 need upgrade.
[00012616]Done.

[00012653]Firmware upgrading[2]...
[00012733][01 01] Firmware upgrade start...
[00043000][01 01] Firmware upgrade finished successfully.
[00043050][01 04] Firmware upgrade start...
[00082359][01 04] Firmware upgrade finished successfully.
[00082996][08 00] Firmware upgrade start...
[00600576][08 00] Firmware upgrade finished successfully.
[00600604]Done.

[00600638]Version checking[3]...
[00600673][01 00][05] v1.7.4399 -> v1.7.4399
[00600705][01 01][05] v1.7.4399 -> v1.7.4399
[00600748][01 04][05] v0.2.4270 -> v0.2.4270
[00600786][04 00][00] v1.28.0.16 -> v1.28.0.15
[00600833][08 00][05] v2.14.9.26 -> v2.14.9.26
[00600863]Packet upgrade finish successfully.



[00012621]========== remo-con disconnect. boot(15) ============
[00012660]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00012701]Packet upgrade start...

[00012749]Packet checking...
[00012792]Packet vlink 01.11.0150 <-> 01.11.0150.
[00012834]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00012875]Done.

[00012916]Version checking[1]...
[00012968][04 00][00] v1.28.0.15 -> v1.31.1.67 need upgrade.
[00025508][08 00][00] device not detected.
[00025547][01 00][00] v1.7.4399 -> v1.29.5379 need upgrade
[00025588][01 01][00] v1.7.4399 -> v1.29.5379 need upgrade
[00025641][01 04][00] v0.2.4270 -> v0.5.5085 need upgrade
[00025709][03 05][00] v34.1.0.5 -> v34.1.0.5
[00025769][03 06][00] v2.4.20.50 -> v2.4.20.50
[00025869][05 00][00] v3.0.6.2 -> v3.0.6.2
[00025919][09 00][00] v5.0.0.0 -> v5.0.0.0
[00026009][11 00][00] v3.9.0.0 -> v3.9.0.0
[00026109][12 00][00] v1.11.0.0 -> v1.11.0.0
[00026209][12 01][00] v1.11.0.0 -> v1.11.0.0
[00026309][12 02][00] v1.11.0.0 -> v1.11.0.0
[00026410][12 03][00] v1.11.0.0 -> v1.11.0.0
[00038950][15 00][00] device not detected.
[00039029][17 00][00] v1.1.0.8 -> v1.1.0.8
[00039129][17 01][00] v2.0.1.6 -> v2.0.1.6
[00039185][19 00][00] v1.0.8.96 -> v1.0.8.96
[00039226]Done.

[00041263]Waiting for user confirm...
[00051301]Timeout, start upgrade automatically.

[00051379]Firmware upgrading[1]...
[00057482][01 00] Firmware upgrade start...
[00007869][01 00] Firmware upgrade finished successfully.
[00007905]Done.

[00007951]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] resumed, card sn [0x2790b2bd].
[00007994]Packet vlink 01.11.0150 <-> 01.11.0150.
[00008033]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00008073]Version checking[2]...
[00008117][04 00][00] v1.28.0.15 -> v1.31.1.67 need upgrade.
[00020662][08 00][00] device not detected.
[00020700][01 00][05] v1.29.5379 -> v1.29.5379
[00020740][01 01][00] v1.7.4399 -> v1.29.5379 need upgrade
[00020869][01 04][00] v0.2.4270 -> v0.5.5085 need upgrade
[00020936][03 05][00] v34.1.0.5 -> v34.1.0.5
[00021015][03 06][00] v2.4.20.50 -> v2.4.20.50
[00021095][05 00][00] v3.0.6.2 -> v3.0.6.2
[00021165][09 00][00] v5.0.0.0 -> v5.0.0.0
[00021236][11 00][00] v3.9.0.0 -> v3.9.0.0
[00021335][12 00][00] v1.11.0.0 -> v1.11.0.0
[00021435][12 01][00] v1.11.0.0 -> v1.11.0.0
[00021535][12 02][00] v1.11.0.0 -> v1.11.0.0
[00021635][12 03][00] v1.11.0.0 -> v1.11.0.0
[00034174][15 00][00] device not detected.
[00034235][17 00][00] v1.1.0.8 -> v1.1.0.8
[00034337][17 01][00] v2.0.1.6 -> v2.0.1.6
[00034391][19 00][00] v1.0.8.96 -> v1.0.8.96
[00034433]Done.

[00034471]Firmware upgrading[2]...
[00034570][01 01] Firmware upgrade start...
[00044854][01 01] Firmware upgrade finished successfully.
[00044902][01 04] Firmware upgrade start...
[00070242][01 04] Firmware upgrade finished successfully.
[00070322][04 00] Firmware upgrade start...
[00134553][04 00] Firmware upgrade finished successfully.
[00134597]Done.

[00134638]Version checking[3]...
[00134687][04 00][05] v1.31.1.67 -> v1.31.1.67
[00147242][08 00][00] device not detected.
[00147284][01 00][05] v1.29.5379 -> v1.29.5379
[00147327][01 01][05] v1.29.5379 -> v1.29.5379
[00147394][01 04][05] v0.5.5085 -> v0.5.5085
[00147481][03 05][00] v34.1.0.5 -> v34.1.0.5
[00147553][03 06][00] v2.4.20.50 -> v2.4.20.50
[00147633][05 00][00] v3.0.6.2 -> v3.0.6.2
[00147688][09 00][00] v5.0.0.0 -> v5.0.0.0
[00147776][11 00][00] v3.9.0.0 -> v3.9.0.0
[00147876][12 00][00] v1.11.0.0 -> v1.11.0.0
[00147976][12 01][00] v1.11.0.0 -> v1.11.0.0
[00148076][12 02][00] v1.11.0.0 -> v1.11.0.0
[00148173][12 03][00] v1.11.0.0 -> v1.11.0.0
[00160722][15 00][00] device not detected.
[00160792][17 00][00] v1.1.0.8 -> v1.1.0.8
[00160912][17 01][00] v2.0.1.6 -> v2.0.1.6
[00160978][19 00][00] v1.0.8.96 -> v1.0.8.96
[00161022]Packet upgrade failed at version checking.



[00006783]========== remo-con disconnect. boot(15) ============
[00006908]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006953]Packet upgrade start...

[00007005]Packet checking...
[00007049]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007106]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007157]Done.

[00007203]Version checking[1]...
[00007256][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019811][08 00][00] device not detected.
[00019854][01 00][00] v1.29.5379 -> v1.29.5379
[00019897][01 01][00] v1.29.5379 -> v1.29.5379
[00019960][01 04][00] v0.5.5085 -> v0.5.5085
[00020025][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020104][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020204][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020259][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020324][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020424][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020551][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020646][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020746][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033291][15 00][00] device not detected.
[00033384][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033484][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033536][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035584]Packet upgrade failed at version checking.



[00006799]========== 2018.10.17 12:03:10. boot(15) ============
[00006852]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006898]Packet upgrade start...

[00006948]Packet checking...
[00006990]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007040]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007089]Done.

[00007132]Version checking[1]...
[00007182][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019739][08 00][00] device not detected.
[00019781][01 00][00] v1.29.5379 -> v1.29.5379
[00019825][01 01][00] v1.29.5379 -> v1.29.5379
[00019875][01 04][00] v0.5.5085 -> v0.5.5085
[00019941][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020001][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020081][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020135][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020301][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020381][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020460][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020541][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020621][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033164][15 00][00] device not detected.
[00035722][17 00][00] v1.1.0.8 -> v1.1.0.8
[00035822][17 01][00] v2.0.1.6 -> v2.0.1.6
[00035881][19 00][00] v1.0.8.96 -> v1.0.8.96
[00037926]Packet upgrade failed at version checking.



[00006797]========== remo-con disconnect. boot(15) ============
[00006843]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006889]Packet upgrade start...

[00006940]Packet checking...
[00006982]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007029]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007074]Done.

[00007132]Version checking[1]...
[00007196][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019745][08 00][00] device not detected.
[00019787][01 00][00] v1.29.5379 -> v1.29.5379
[00019828][01 01][00] v1.29.5379 -> v1.29.5379
[00019879][01 04][00] v0.5.5085 -> v0.5.5085
[00019963][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020043][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020103][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020174][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020243][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020343][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020443][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020547][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020643][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033192][15 00][00] device not detected.
[00033263][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033363][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033420][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035464]Packet upgrade failed at version checking.



[00006789]========== remo-con disconnect. boot(15) ============
[00006831]Packet [C:\WM610_FC550_FW_V01.10.01.40.bin] detected, card sn [0x2790b2bd].
[00006876]Packet upgrade start...

[00006931]Packet checking...
[00006978]Packet vlink 01.10.0140 <-> 01.09.0130.
[00007108]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007166]Done.

[00007211]Version checking[1]...
[00007268][04 00][00] v1.31.1.67 -> v1.30.1.28
[00019816][08 00][00] device not detected.
[00019860][01 00][00] v1.29.5379 -> v1.29.5379
[00019907][01 01][00] v1.29.5379 -> v1.29.5379
[00019960][01 04][00] v0.5.5085 -> v0.5.5085
[00020041][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020120][03 06][00] v2.4.20.50 -> v2.4.20.28
[00020200][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020254][09 00][00] v5.0.0.0 -> v3.1.0.0
[00020320][11 00][00] v3.9.0.0 -> v3.9.0.0
[00020400][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020480][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020560][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020642][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033192][15 00][00] device not detected.
[00033260][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033360][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033415][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035457]Packet upgrade failed at version checking.



[00006817]========== remo-con disconnect. boot(15) ============
[00006868]Packet [C:\WM610_FC550_FW_V01.10.01.40.bin] detected, card sn [0x2790b2bd].
[00006914]Packet upgrade start...

[00006967]Packet checking...
[00007013]Packet vlink 01.10.0140 <-> 01.09.0130.
[00007068]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007115]Done.

[00007162]Version checking[1]...
[00007218][04 00][00] v1.31.1.67 -> v1.30.1.28
[00019773][08 00][00] device not detected.
[00019817][01 00][00] v1.29.5379 -> v1.29.5379
[00019864][01 01][00] v1.29.5379 -> v1.29.5379
[00019917][01 04][00] v0.5.5085 -> v0.5.5085
[00019996][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020096][03 06][00] v2.4.20.50 -> v2.4.20.28
[00020176][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020230][09 00][00] v5.0.0.0 -> v3.1.0.0
[00020296][11 00][00] v3.10.0.0 -> v3.9.0.0
[00020376][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020456][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020536][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020615][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033256][15 00][00] device not detected.
[00033335][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033435][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033489][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035540]Packet upgrade failed at version checking.



[00006799]========== remo-con disconnect. boot(15) ============
[00006847]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006895]Packet upgrade start...

[00006951]Packet checking...
[00006999]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007047]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007106]Done.

[00007166]Version checking[1]...
[00007219][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019774][08 00][00] device not detected.
[00019817][01 00][00] v1.29.5379 -> v1.29.5379
[00019863][01 01][00] v1.29.5379 -> v1.29.5379
[00019917][01 04][00] v0.5.5085 -> v0.5.5085
[00019999][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020079][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020179][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020233][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020319][11 00][00] v3.10.0.0 -> v3.9.0.0
[00020419][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020499][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020619][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020719][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033266][15 00][00] device not detected.
[00033339][17 00][00] v1.1.0.8 -> v1.1.0.8
[00035959][17 01][00] v2.0.1.6 -> v2.0.1.6
[00036014][19 00][00] v1.0.8.96 -> v1.0.8.96
[00038060]Packet upgrade failed at version checking.



[00006800]========== remo-con disconnect. boot(15) ============
[00006846]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006895]Packet upgrade start...

[00006951]Packet checking...
[00006999]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007047]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007106]Done.

[00007166]Version checking[1]...
[00007219][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019774][08 00][00] device not detected.
[00019895][01 00][00] v1.29.5379 -> v1.29.5379
[00019945][01 01][00] v1.29.5379 -> v1.29.5379
[00019996][01 04][00] v0.5.5085 -> v0.5.5085
[00020085][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020208][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020307][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020376][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020444][11 00][00] v3.10.0.0 -> v3.9.0.0
[00020525][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020645][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020744][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020844][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033392][15 00][00] device not detected.
[00033465][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033565][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033621][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035667]Packet upgrade failed at version checking.



[00006731]========== remo-con disconnect. boot(15) ============
[00006777]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006829]Packet upgrade start...

[00006886]Packet checking...
[00006937]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006985]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007040]Done.

[00007099]Version checking[1]...
[00007162][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019712][08 00][00] device not detected.
[00019758][01 00][00] v1.29.5379 -> v1.29.5379
[00019807][01 01][00] v1.29.5379 -> v1.29.5379
[00019860][01 04][00] v0.5.5085 -> v0.5.5085
[00019943][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020023][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020103][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020163][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020242][11 00][00] v3.10.0.0 -> v3.9.0.0
[00020343][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020443][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020543][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020643][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033189][15 00][00] device not detected.
[00033283][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033383][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033438][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035579]Packet upgrade failed at version checking.



[00006833]========== remo-con disconnect. boot(15) ============
[00006883]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006933]Packet upgrade start...

[00006987]Packet checking...
[00007040]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007092]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007145]Done.

[00007199]Version checking[1]...
[00007271][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019821][08 00][00] device not detected.
[00019869][01 00][00] v1.29.5379 -> v1.29.5379
[00019917][01 01][00] v1.29.5379 -> v1.29.5379
[00019969][01 04][00] v0.5.5085 -> v0.5.5085
[00020046][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020126][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020208][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020270][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020346][11 00][00] v3.10.0.0 -> v3.9.0.0
[00020446][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020546][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020646][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020746][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033294][15 00][00] device not detected.
[00033366][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033466][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033527][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035574]Packet upgrade failed at version checking.



[00006739]========== remo-con disconnect. boot(15) ============
[00006784]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006839]Packet upgrade start...

[00006891]Packet checking...
[00006943]Packet vlink 01.11.0150 <-> 01.11.0150.
[00006992]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007047]Done.

[00007109]Version checking[1]...
[00007176][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019741][08 00][00] device not detected.
[00019787][01 00][00] v1.29.5379 -> v1.29.5379
[00019833][01 01][00] v1.29.5379 -> v1.29.5379
[00019888][01 04][00] v0.5.5085 -> v0.5.5085
[00019987][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020087][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020227][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020298][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020367][11 00][00] v3.10.0.0 -> v3.9.0.0
[00020446][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020528][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020608][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020708][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033257][15 00][00] device not detected.
[00033327][17 00][00] v1.1.0.8 -> v1.1.0.8
[00035947][17 01][00] v2.0.1.6 -> v2.0.1.6
[00036006][19 00][00] v1.0.8.96 -> v1.0.8.96
[00038056]Packet upgrade failed at version checking.



[00006823]========== remo-con disconnect. boot(15) ============
[00006883]Packet [C:\WM610_FC550_FW_V01.11.01.50.bin] detected, card sn [0x2790b2bd].
[00006938]Packet upgrade start...

[00007005]Packet checking...
[00007055]Packet vlink 01.11.0150 <-> 01.11.0150.
[00007115]Record vlink 01.01.0040 <-> 01.00.0030 (flow = 0).
[00007187]Done.

[00007240]Version checking[1]...
[00007304][04 00][00] v1.31.1.67 -> v1.31.1.67
[00019861][08 00][00] device not detected.
[00019910][01 00][00] v1.29.5379 -> v1.29.5379
[00019960][01 01][00] v1.29.5379 -> v1.29.5379
[00020017][01 04][00] v0.5.5085 -> v0.5.5085
[00020104][03 05][00] v34.1.0.5 -> v34.1.0.5
[00020204][03 06][00] v2.4.20.50 -> v2.4.20.50
[00020287][05 00][00] v3.0.6.2 -> v3.0.6.2
[00020374][09 00][00] v5.0.0.0 -> v5.0.0.0
[00020444][11 00][00] v3.10.0.0 -> v3.9.0.0
[00020565][12 00][00] v1.11.0.0 -> v1.11.0.0
[00020664][12 01][00] v1.11.0.0 -> v1.11.0.0
[00020764][12 02][00] v1.11.0.0 -> v1.11.0.0
[00020864][12 03][00] v1.11.0.0 -> v1.11.0.0
[00033428][15 00][00] device not detected.
[00033505][17 00][00] v1.1.0.8 -> v1.1.0.8
[00033644][17 01][00] v2.0.1.6 -> v2.0.1.6
[00033711][19 00][00] v1.0.8.96 -> v1.0.8.96
[00035764]Packet upgrade failed at version checking.

请问能看得出是哪里出问题了吗?
评论
上传
你需要登录之后才能回帖    登录 | 注册
热那亚船长  Goggles认证用户 2018-10-17 2#
返厂要客服帮你把
董翀  Inspire 1 Pro认证用户 2018-10-17 3#
回家看看吧
懒得跟你比懒  Mavic 2 Pro认证用户 2018-10-18 4#
建议返厂检测一下
Courage is like a muscle, we strengthen it with use.
夏清  超级版主 2018-10-18 5#
楼主您好,关于您的这一问题,我已反馈给相关工作人员帮您查看哦,如有更新,我会第一时间在这回复您。
微信关注“DJI大疆服务”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
千红   2018-10-18 6#
版本跨的太大,视频编码板和OFDM板的固件没有正常升级识别,应该先不挂云台把机器升级到1.3.0.0,之后再升级到最新固件就对了

自己不会强制刷固件的话还是返厂刷更快一些
不签
春媚  超级版主 2018-10-18 7#
楼主您好,查看了您提供的LOG,里面有两个模块未识别到,这一情况建议您排查一下减震板上的金手指(下左)是否有污渍,或者金属氧化,可用酒精擦拭一下,待酒精挥发干了之后,再安装上去试试;以及重新插拔减震板跟飞机之间的排线(下右),再升级试试;如若问题依旧,建议您将飞行器和云台相机一并寄回,我们帮您检测一下,您可以登录官网登记自助寄修:http://www.dji.com/cn/service/repair
微信关注“DJI大疆服务”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
楼主  Inspire 1 V2.0认证用户 2018-10-19 8#
春媚超级版主10-18 19:54
楼主您好,查看了您提供的LOG,里面有两个模块未识别到,这一情况建议您排查一下减震板上的金手指(下左)是否有污渍,或者金属氧化,可用酒精擦拭一下,待酒精挥发干了之后,再安装上去试试;以及重新插拔减震板跟飞机之间的排线(下右),再升级试试;如若问题依旧,建议您将飞行器和云台相机一并寄回,我们帮您检测一下,您可以登录官网登记自助寄修:http://www.dji.com/cn/service/repair
[图片]
已经重新插稳排线、擦过金手指都无效,已经返厂去了
春媚  超级版主 2018-10-19 9#
流浪飞手冬莱童鞋Phantom 3 SE10-19 14:24
已经重新插稳排线、擦过金手指都无效,已经返厂去了
楼主您好,感谢回复,如若是这一情况可告知我案例号,我帮您进行跟进。
已累计飞行121241米
认证设备
收藏 点赞 评论
分享至:
回复:
上传
取消 评论
快速回复 返回顶部 返回列表