请选择 进入手机版 | 继续访问电脑版
正在上传图片(0/1)

固件升级失败--求救

 0
手机看帖 15 2049
p3p飞行器使用sd卡,从Phantom 3 Professional 固件升级包 v1.7.0060升级到Phantom 3 Professional 固件升级包 v1.8.80,指示灯从刚开始红绿交替闪烁,过了一会就一直是红灯亮,并一直发出“滴滴......”的响声,请秋香等高手指点。


评论
上传
你需要登录之后才能回帖    登录 | 注册
times   2016-4-26 2#
还有人升级,你是故意的吗?要去做实验?
350238091  Phantom 3 Professional认证用户 2016-4-26 3#
平时没有看到论坛
楼主  Osmo认证用户 2016-4-26 4#
times 发表于 2016-4-26 08:45
还有人升级,你是故意的吗?要去做实验?
没有看,什么情况?
楼主  Osmo认证用户 2016-4-26 5#
350238091 发表于 2016-4-26 08:51
平时没有看到论坛
什么情况
楼主  Osmo认证用户 2016-4-26 6#
Delete history success.

Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.12 16:17:09 =====================
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:32 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:41:23 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.23 18:28:17 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.23 18:35:12 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.23 18:55:43 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.25 08:52:17 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.04.25 08:53:41 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
这是升级产生的文件,请帮忙指点。

Lezhi  Phantom 4认证用户 2016-4-26 7#
升级有风险,手贱需谨慎    升级容易 降级无门
楼主  Osmo认证用户 2016-4-26 8#
升级不成功后,常出现的问题。无图传和有图传都是瞬间变化。
djiapp画面.png
无图传信号.jpg
有图传信号.jpg
秋香  超级版主 2016-4-26 9#
67288441 发表于 2016-4-26 09:23
升级不成功后,常出现的问题。无图传和有图传都是瞬间变化。
看看升级的misc/log里的文件
微信关注“DJI大疆服务”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
楼主  Osmo认证用户 2016-4-27 10#
秋香 发表于 2016-4-26 10:47
看看升级的misc/log里的文件
Delete history success.

Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.12 16:17:09 =====================
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:32 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.07.0060.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:41:23 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.23 18:28:17 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.23 18:35:12 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.23 18:55:43 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.04.25 08:52:17 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2016.04.25 08:53:41 =====================
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:11 remo-con disconnect======
Packet: P3X_FW_V01.08.0080.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
秋香  超级版主 2016-4-27 11#
67288441 发表于 2016-4-27 08:21
Delete history success.

Result: Abort.
这是TXT 亲
misc/log是另一个文件哦


微信关注“DJI大疆服务”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
楼主  Osmo认证用户 2016-4-29 12#
秋香 发表于 2016-4-27 17:55
这是TXT 亲
misc/log是另一个文件哦
misc/log这个文件在哪里拿,在djigo里面吗?


秋香  超级版主 2016-4-29 13#
67288441 发表于 2016-4-29 15:16
misc/log这个文件在哪里拿,在djigo里面吗?
升级的SD卡里
微信关注“DJI大疆服务”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
楼主  Osmo认证用户 2016-5-3 14#
升级之后除了.bin,产生了.txt文件,再也没有产生其他任何文件了。
秋香  超级版主 2016-5-4 15#
67288441 发表于 2016-5-3 08:00
升级之后除了.bin,产生了.txt文件,再也没有产生其他任何文件了。
misc/log是一个隐藏文件,您搜索试试
微信关注“DJI大疆服务”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
teihoshi   2017-9-16 16#

M100固件升级遇到同样问题,下面是MISC/LOG文件内容,求指导啊
[00004598]========== remo-con disconnect. boot(15) ============
[00004727]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00004776]Packet upgrade start...

[00004840]Packet checking...
[00004891]Packet vlink 01.01.0010 <-> 01.00.0007.
[00004977]Done.

[00005032]Version checking[1]...
[00005124][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005203][03 06][00] v2.2.6.20 -> v2.3.2.3 need upgrade.
[00005286][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005348][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005443][12 00][00] v1.8.0.0 -> v1.9.0.0 need upgrade.
[00005543][12 01][00] v1.8.0.0 -> v1.9.0.0 need upgrade.
[00005643][12 02][00] v1.8.0.0 -> v1.9.0.0 need upgrade.
[00005743][12 03][00] v1.8.0.0 -> v1.9.0.0 need upgrade.
[00006017][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006074][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006114][01 00][00] v1.22.3809 -> v1.19.3422
[00006159][01 01][00] v1.22.3809 -> v1.19.3422
[00006205][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006307][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006384][11 00][00] v3.7.1.0 -> v3.7.15.9 need upgrade.
[00006427]Done.

[00008473]Waiting for user confirm...
[00018515]Timeout, start upgrade automatically.

[00018586]Firmware upgrading[1]...
[00018642][12 00] Firmware upgrade start...
[00073496][12 00] Firmware upgrade finished successfully.
[00073551][12 01] Firmware upgrade start...
[00004495]========== remo-con disconnect. boot(15) ============
[00004539]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00004578]Packet upgrade start...

[00004629]Packet checking...
[00004675]Packet vlink 01.01.0010 <-> 01.00.0007.
[00004765]Done.

[00004824]Version checking[1]...
[00004898][03 05][00] v34.1.0.5 -> v34.1.0.5
[00004978][03 06][00] v2.2.6.20 -> v2.3.2.3 need upgrade.
[00005059][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005108][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005198][12 00][00] v1.9.0.0 -> v1.9.0.0
[00005298][12 01][00] v0.0.0.0 -> v1.9.0.0 need upgrade.
[00005398][12 02][00] v1.8.0.0 -> v1.9.0.0 need upgrade.
[00005638][12 03][00] v1.8.0.0 -> v1.9.0.0 need upgrade.
[00005974][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006033][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006073][01 00][00] v1.22.3809 -> v1.19.3422
[00006115][01 01][00] v1.22.3809 -> v1.19.3422
[00006168][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006326][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006399][11 00][00] v3.7.1.0 -> v3.7.15.9 need upgrade.
[00006440]Done.

[00008480]Waiting for user confirm...
[00018526]Timeout, start upgrade automatically.

[00018595]Firmware upgrading[1]...
[00018651][12 01] Firmware upgrade start...
[00073431][12 01] Firmware upgrade finished successfully.
[00073483][12 02] Firmware upgrade start...
[00128112][12 02] Firmware upgrade finished successfully.
[00128164][12 03] Firmware upgrade start...
[00182683][12 03] Firmware upgrade finished successfully.
[00182913][03 06] Firmware upgrade start...
[00005367]========== remo-con disconnect. boot(15) ============
[00005449]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00005533]Packet upgrade start...

[00005636]Packet checking...
[00005719]Packet vlink 01.01.0010 <-> 01.00.0007.
[00005839]Done.

[00005924]Version checking[1]...
[00006039][03 05][00] v34.1.0.5 -> v34.1.0.5
[00006139][03 06][00] v1.0.0.1 -> v2.3.2.3 need upgrade.
[00006255][05 00][00] v3.0.6.1 -> v3.0.6.1
[00006350][09 00][00] v1.8.0.0 -> v1.8.0.0
[00018945][12 00][00] device not detected.
[00031483][12 01][00] device not detected.
[00044033][12 02][00] device not detected.
[00056574][12 03][00] device not detected.
[00056700][15 00][00] v1.1.2.0 -> v1.1.2.0
[00056756][19 00][00] v1.0.8.96 -> v1.0.8.96
[00056792][01 00][00] v1.22.3809 -> v1.19.3422
[00056830][01 01][00] v1.22.3809 -> v1.19.3422
[00056885][04 00][00] v1.26.0.21 -> v1.26.0.21
[00056929][08 00][00] v1.14.0.25 -> v1.14.0.25
[00056996][11 00][00] v3.7.1.0 -> v3.7.15.9 need upgrade.
[00057034]Done.

[00059079]Waiting for user confirm...
[00069201]Timeout, start upgrade automatically.

[00069278]Firmware upgrading[1]...
[00069502][03 06] Firmware upgrade start...
[00302674][03 06] Firmware upgrade finished successfully.
[00302765][11 00] Firmware upgrade start...
[00385887][11 00] Firmware upgrade finished successfully.
[00385924]Done.

[00385963]Version checking[2]...
[00386049][03 05][00] v34.1.0.5 -> v34.1.0.5
[00386129][03 06][05] v2.3.2.3 -> v2.3.2.3
[00386209][05 00][00] v3.0.6.1 -> v3.0.6.1
[00386304][09 00][00] v1.8.0.0 -> v1.8.0.0
[00386389][12 00][00] v1.9.0.0 -> v1.9.0.0
[00386471][12 01][00] v1.9.0.0 -> v1.9.0.0
[00386549][12 02][00] v1.9.0.0 -> v1.9.0.0
[00386629][12 03][00] v1.9.0.0 -> v1.9.0.0
[00386781][15 00][00] v1.1.2.0 -> v1.1.2.0
[00386829][19 00][00] v1.0.8.96 -> v1.0.8.96
[00386876][01 00][00] v1.22.3809 -> v1.19.3422
[00386915][01 01][00] v1.22.3809 -> v1.19.3422
[00386960][04 00][00] v1.26.0.21 -> v1.26.0.21
[00387009][08 00][00] v1.14.0.25 -> v1.14.0.25
[00387089][11 00][05] v3.7.15.9 -> v3.7.15.9
[00387128]Packet upgrade finish successfully.



[00004510]========== remo-con disconnect. boot(15) ============
[00004556]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00004597]Packet upgrade start...

[00004648]Packet checking...
[00004700]Packet vlink 01.01.0010 <-> 01.00.0007.
[00004763]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00004814]Done.

[00004876]Version checking[1]...
[00004980][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005080][03 06][00] v2.3.2.3 -> v2.3.2.3
[00005140][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005204][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005319][12 00][00] v1.9.0.0 -> v1.9.0.0
[00005419][12 01][00] v1.9.0.0 -> v1.9.0.0
[00005539][12 02][00] v1.9.0.0 -> v1.9.0.0
[00005639][12 03][00] v1.9.0.0 -> v1.9.0.0
[00005960][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006019][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006061][01 00][00] v1.22.3809 -> v1.19.3422
[00006102][01 01][00] v1.22.3809 -> v1.19.3422
[00006299][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006359][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006440][11 00][00] v3.7.15.9 -> v3.7.15.9
[00008481]Packet upgrade cancelled at version checking.



[00004567]========== 2015.11.26 17:21:16. boot(15) ============
[00004607]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00004656]Packet upgrade start...

[00004703]Packet checking...
[00004769]Packet vlink 01.01.0010 <-> 01.00.0007.
[00004834]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00004897]Done.

[00004963]Version checking[1]...
[00005068][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005167][03 06][00] v2.3.2.3 -> v2.3.2.3
[00005228][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005299][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005407][12 00][00] v1.9.0.0 -> v1.9.0.0
[00005529][12 01][00] v1.9.0.0 -> v1.9.0.0
[00005629][12 02][00] v1.9.0.0 -> v1.9.0.0
[00005730][12 03][00] v1.9.0.0 -> v1.9.0.0
[00006017][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006077][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006120][01 00][00] v1.22.3809 -> v1.19.3422
[00006170][01 01][00] v1.22.3809 -> v1.19.3422
[00006219][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006314][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006388][11 00][00] v3.7.15.9 -> v3.7.15.9
[00008439]Packet upgrade cancelled at version checking.



[00004570]========== 2015.11.26 17:28:52. boot(15) ============
[00004609]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00004658]Packet upgrade start...

[00004706]Packet checking...
[00004771]Packet vlink 01.01.0010 <-> 01.00.0007.
[00004835]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00004897]Done.

[00004963]Version checking[1]...
[00005057][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005136][03 06][00] v2.3.2.3 -> v2.3.2.3
[00005236][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005300][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005416][12 00][00] v1.9.0.0 -> v1.9.0.0
[00005536][12 01][00] v1.9.0.0 -> v1.9.0.0
[00005758][12 02][00] v1.9.0.0 -> v1.9.0.0
[00005858][12 03][00] v1.9.0.0 -> v1.9.0.0
[00005998][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006065][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006108][01 00][00] v1.22.3809 -> v1.19.3422
[00006150][01 01][00] v1.22.3809 -> v1.19.3422
[00006205][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006304][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006377][11 00][00] v3.7.15.9 -> v3.7.15.9
[00008427]Packet upgrade cancelled at version checking.



[00004543]========== 2015.11.26 17:42:25. boot(15) ============
[00004586]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00004633]Packet upgrade start...

[00004681]Packet checking...
[00004735]Packet vlink 01.01.0010 <-> 01.00.0007.
[00004797]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00004865]Done.

[00004931]Version checking[1]...
[00005038][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005138][03 06][00] v2.3.2.3 -> v2.3.2.3
[00005199][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005278][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005378][12 00][00] v1.9.0.0 -> v1.9.0.0
[00005498][12 01][00] v1.9.0.0 -> v1.9.0.0
[00005598][12 02][00] v1.9.0.0 -> v1.9.0.0
[00005698][12 03][00] v1.9.0.0 -> v1.9.0.0
[00005999][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006064][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006108][01 00][00] v1.22.3809 -> v1.19.3422
[00006152][01 01][00] v1.22.3809 -> v1.19.3422
[00006208][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006331][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006399][11 00][00] v3.7.15.9 -> v3.7.15.9
[00008450]Packet upgrade cancelled at version checking.



[00004547]========== remo-con disconnect. boot(15) ============
[00004592]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00004639]Packet upgrade start...

[00004699]Packet checking...
[00004764]Packet vlink 01.01.0010 <-> 01.00.0007.
[00004828]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00004886]Done.

[00004950]Version checking[1]...
[00005200][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005300][03 06][00] v2.3.2.3 -> v2.3.2.3
[00005379][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005464][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005579][12 00][00] v1.9.0.0 -> v1.9.0.0
[00005679][12 01][00] v1.9.0.0 -> v1.9.0.0
[00005799][12 02][00] v1.9.0.0 -> v1.9.0.0
[00005899][12 03][00] v1.9.0.0 -> v1.9.0.0
[00006005][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006064][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006108][01 00][00] v1.22.3809 -> v1.19.3422
[00006152][01 01][00] v1.22.3809 -> v1.19.3422
[00006207][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006312][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006400][11 00][00] v3.7.15.9 -> v3.7.15.9
[00008450]Packet upgrade cancelled at version checking.



[00004932]========== 2015.11.27 18:20:09. boot(15) ============
[00004997]Packet [C:\MATRICE100_FW_V01.01.00.10.bin] detected, card sn [0x54a70f5e].
[00005065]Packet upgrade start...

[00005139]Packet checking...
[00005204]Packet vlink 01.01.0010 <-> 01.00.0007.
[00005264]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00005307]Done.

[00005366]Version checking[1]...
[00005468][03 05][00] v34.1.0.5 -> v34.1.0.5
[00005548][03 06][00] v2.3.2.3 -> v2.3.2.3
[00005629][05 00][00] v3.0.6.1 -> v3.0.6.1
[00005703][09 00][00] v1.8.0.0 -> v1.8.0.0
[00005830][12 00][00] v1.9.0.0 -> v1.9.0.0
[00005950][12 01][00] v1.9.0.0 -> v1.9.0.0
[00006048][12 02][00] v1.9.0.0 -> v1.9.0.0
[00006149][12 03][00] v1.9.0.0 -> v1.9.0.0
[00006404][15 00][00] v1.1.2.0 -> v1.1.2.0
[00006469][19 00][00] v1.0.8.96 -> v1.0.8.96
[00006522][01 00][00] v1.22.3809 -> v1.19.3422
[00006574][01 01][00] v1.22.3809 -> v1.19.3422
[00006664][04 00][00] v1.26.0.21 -> v1.26.0.21
[00006720][08 00][00] v1.14.0.25 -> v1.14.0.25
[00006789][11 00][00] v3.7.15.9 -> v3.7.15.9
[00008853]Packet upgrade cancelled at version checking.



[00007704]========== remo-con disconnect. boot(15) ============
[00007776]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x3896a584].
[00007978]Packet upgrade start...

[00008054]Packet checking...
[00008124]Packet vlink 01.03.0100 <-> 01.02.0080.
[00008185]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00008340]Done.

[00008591]Version checking[1]...
[00021242][08 00][00] device not detected.
[00021332][03 05][00] v34.1.0.10 -> v34.1.0.10
[00021432][03 06][00] v3.1.5.68 -> v3.1.6.103 need upgrade.
[00021513][12 00][00] v1.12.0.0 -> v1.12.0.0
[00021632][12 01][00] v1.12.0.0 -> v1.12.0.0
[00021733][12 02][00] v1.12.0.0 -> v1.12.0.0
[00021852][12 03][00] v1.12.0.0 -> v1.12.0.0
[00034394][15 00][00] device not detected.
[00034541][19 00][00] v1.0.8.96 -> v1.0.8.96
[00034670][01 00][00] v1.22.3809 -> v2.65.5033 need upgrade
[00034793][01 01][00] v1.22.3809 -> v2.65.5033 need upgrade
[00034875][04 00][00] v1.26.0.21 -> v1.29.0.92 need upgrade.
[00034971][05 00][00] v3.0.6.2 -> v3.0.6.2
[00035026][09 00][00] v3.0.0.4 -> v3.0.0.4
[00047574][11 00][00] device not detected.
[00047620]Done.

[00049668]Waiting for user confirm...
[00059714]Timeout, start upgrade automatically.

[00059812]Firmware upgrading[1]...
[00083431][01 00] Firmware upgrade start...
[00024499]========== 2017.09.16 13:51:42. boot(15) ============
[00024548]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x3896a584].
[00024588]Packet upgrade start...

[00024642]Packet checking...
[00024690]Packet vlink 01.03.0100 <-> 01.02.0080.
[00024746]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00024790]Done.

[00024840]Version checking[1]...
[00024896][08 00][00] v1.14.0.25 -> v2.14.9.42 need upgrade.
[00024971][03 05][00] v34.1.0.10 -> v34.1.0.10
[00025048][03 06][00] v3.1.5.68 -> v3.1.6.103 need upgrade.
[00025148][12 00][00] v1.12.0.0 -> v1.12.0.0
[00025248][12 01][00] v1.12.0.0 -> v1.12.0.0
[00025348][12 02][00] v1.12.0.0 -> v1.12.0.0
[00025448][12 03][00] v1.12.0.0 -> v1.12.0.0
[00025655][15 00][00] v1.1.2.0 -> v1.1.2.0
[00025714][19 00][00] v1.0.8.96 -> v1.0.8.96
[00025856][01 00][00] v2.65.5033 -> v2.65.5033
[00025902][01 01][00] v1.22.3809 -> v2.65.5033 need upgrade
[00025960][04 00][00] v1.26.0.21 -> v1.29.0.92 need upgrade.
[00026049][05 00][00] v3.0.6.2 -> v3.0.6.2
[00026120][09 00][00] v3.0.0.4 -> v3.0.0.4
[00038666][11 00][00] device not detected.
[00038718]Done.

[00040780]Waiting for user confirm...
[00050834]Timeout, start upgrade automatically.

[00050938]Firmware upgrading[1]...
[00051055][01 01] Firmware upgrade start...
[00061360][01 01] Firmware upgrade finished successfully.
[00062291][08 00] Firmware upgrade start...
[00007505]========== remo-con disconnect. boot(15) ============
[00007599]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x3896a584].
[00007651]Packet upgrade start...

[00007703]Packet checking...
[00007752]Packet vlink 01.03.0100 <-> 01.02.0080.
[00007804]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00007860]Done.

[00007914]Version checking[1]...
[00020464][08 00][00] device not detected.
[00020548][03 05][00] v34.1.0.10 -> v34.1.0.10
[00020628][03 06][00] v3.1.5.68 -> v3.1.6.103 need upgrade.
[00020728][12 00][00] v1.12.0.0 -> v1.12.0.0
[00021088][12 01][00] v1.12.0.0 -> v1.12.0.0
[00021188][12 02][00] v1.12.0.0 -> v1.12.0.0
[00021287][12 03][00] v1.12.0.0 -> v1.12.0.0
[00033847][15 00][00] device not detected.
[00033907][19 00][00] v1.0.8.96 -> v1.0.8.96
[00033959][01 00][00] v2.65.5033 -> v2.65.5033
[00034003][01 01][00] v2.65.5033 -> v2.65.5033
[00034064][04 00][00] v1.26.0.21 -> v1.29.0.92 need upgrade.
[00034147][05 00][00] v3.0.6.2 -> v3.0.6.2
[00034207][09 00][00] v3.0.0.4 -> v3.0.0.4
[00046755][11 00][00] device not detected.
[00046807]Done.

[00050372]Waiting for user confirm...
[00060425]Timeout, start upgrade automatically.

[00060562]Firmware upgrading[1]...
[00060784][03 06] Firmware upgrade start...
[00007443]========== remo-con disconnect. boot(15) ============
[00007496]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x3896a584].
[00007633]Packet upgrade start...

[00007692]Packet checking...
[00007744]Packet vlink 01.03.0100 <-> 01.02.0080.
[00007797]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00007852]Done.

[00007898]Version checking[1]...
[00020456][08 00][00] device not detected.
[00020549][03 05][00] v34.1.0.10 -> v34.1.0.10
[00020629][03 06][00] v0.0.0.0 -> v3.1.6.103 need upgrade.
[00033177][12 00][00] device not detected.
[00006689]========== remo-con disconnect. boot(15) ============
[00006751]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x54a70f5e].
[00006817]Packet upgrade start...

[00006897]Packet checking...
[00006987]Packet vlink 01.03.0100 <-> 01.02.0080.
[00007047]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00007100]Done.

[00007156]Version checking[1]...
[00019709][08 00][00] device not detected.
[00019791][03 05][00] v34.1.0.10 -> v34.1.0.10
[00019871][03 06][00] v0.0.0.0 -> v3.1.6.103 need upgrade.
[00032425][12 00][00] device not detected.
[00044981][12 01][00] device not detected.
[00057546][12 02][00] device not detected.
[00070095][12 03][00] device not detected.
[00082646][15 00][00] device not detected.
[00082710][19 00][00] v1.0.8.96 -> v1.0.8.96
[00082762][01 00][00] v2.65.5033 -> v2.65.5033
[00082822][01 01][00] v2.65.5033 -> v2.65.5033
[00082880][04 00][00] v1.26.0.21 -> v1.29.0.92 need upgrade.
[00083005][05 00][00] v3.0.6.2 -> v3.0.6.2
[00083072][09 00][00] v3.0.0.4 -> v3.0.0.4
[00095624][11 00][00] device not detected.
[00095672]Done.

[00099230]Waiting for user confirm...
[00109285]Timeout, start upgrade automatically.

[00109418]Firmware upgrading[1]...
[00109585][03 06] Firmware upgrade start...
[00006626]========== 2017.09.16 14:57:16. boot(15) ============
[00006693]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x54a70f5e].
[00006751]Packet upgrade start...

[00006808]Packet checking...
[00006866]Packet vlink 01.03.0100 <-> 01.02.0080.
[00007045]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00007092]Done.

[00007144]Version checking[1]...
[00019693][08 00][00] device not detected.
[00019778][03 05][00] v34.1.0.10 -> v34.1.0.10
[00019858][03 06][00] v0.0.0.0 -> v3.1.6.103 need upgrade.
[00032405][12 00][00] device not detected.
[00044956][12 01][00] device not detected.
[00057501][12 02][00] device not detected.
[00070043][12 03][00] device not detected.
[00082588][15 00][00] device not detected.
[00082648][19 00][00] v1.0.8.96 -> v1.0.8.96
[00082694][01 00][00] v2.65.5033 -> v2.65.5033
[00082741][01 01][00] v2.65.5033 -> v2.65.5033
[00082805][04 00][00] v1.26.0.21 -> v1.29.0.92 need upgrade.
[00082891][05 00][00] v3.0.6.2 -> v3.0.6.2
[00082949][09 00][00] v3.0.0.4 -> v3.0.0.4
[00095496][11 00][00] device not detected.
[00095541]Done.

[00099097]Waiting for user confirm...
[00109143]Timeout, start upgrade automatically.

[00109240]Firmware upgrading[1]...
[00109403][03 06] Firmware upgrade start...
[00006632]========== 2017.09.16 15:02:59. boot(15) ============
[00006689]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x54a70f5e].
[00006751]Packet upgrade start...

[00006818]Packet checking...
[00006872]Packet vlink 01.03.0100 <-> 01.02.0080.
[00006958]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00007018]Done.

[00007068]Version checking[1]...
[00019616][08 00][00] device not detected.
[00019702][03 05][00] v34.1.0.10 -> v34.1.0.10
[00019782][03 06][00] v0.0.0.0 -> v3.1.6.103 need upgrade.
[00032334][12 00][00] device not detected.
[00044879][12 01][00] device not detected.
[00057422][12 02][00] device not detected.
[00069967][12 03][00] device not detected.
[00082512][15 00][00] device not detected.
[00082582][19 00][00] v1.0.8.96 -> v1.0.8.96
[00082627][01 00][00] v2.65.5033 -> v2.65.5033
[00082677][01 01][00] v2.65.5033 -> v2.65.5033
[00082734][04 00][00] v1.26.0.21 -> v1.29.0.92 need upgrade.
[00082836][05 00][00] v3.0.6.2 -> v3.0.6.2
[00082991][09 00][00] v3.0.0.4 -> v3.0.0.4
[00095554][11 00][00] device not detected.
[00095599]Done.

[00099162]Waiting for user confirm...
[00109230]Timeout, start upgrade automatically.

[00109319]Firmware upgrading[1]...
[00109496][03 06] Firmware upgrade start...
[00007670]========== 2017.09.16 16:00:51. boot(15) ============
[00007727]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x54a70f5e].
[00007783]Packet upgrade start...

[00007886]Packet checking...
[00007945]Packet vlink 01.03.0100 <-> 01.02.0080.
[00007994]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00008045]Done.

[00008093]Version checking[1]...
[00020648][08 00][00] device not detected.
[00020727][03 05][00] v34.1.0.10 -> v34.1.0.10
[00020808][03 06][00] v0.0.0.0 -> v3.1.6.103 need upgrade.
[00033364][12 00][00] device not detected.
[00045910][12 01][00] device not detected.
[00058457][12 02][00] device not detected.
[00071003][12 03][00] device not detected.
[00007767]========== remo-con disconnect. boot(15) ============
[00007828]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x54a70f5e].
[00007883]Packet upgrade start...

[00007953]Packet checking...
[00008037]Packet vlink 01.03.0100 <-> 01.02.0080.
[00008102]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00008156]Done.

[00008202]Version checking[1]...
[00020758][08 00][00] device not detected.
[00020845][03 05][00] v34.1.0.10 -> v34.1.0.10
[00020931][03 06][00] v0.0.0.0 -> v3.1.6.103 need upgrade.
[00033480][12 00][00] device not detected.
[00046030][12 01][00] device not detected.
[00058578][12 02][00] device not detected.
[00071124][12 03][00] device not detected.
[00083671][15 00][00] device not detected.
[00083735][19 00][00] v1.0.8.96 -> v1.0.8.96
[00083784][01 00][00] v2.65.5033 -> v2.65.5033
[00083842][01 01][00] v2.65.5033 -> v2.65.5033
[00083900][04 00][00] v1.26.0.21 -> v1.29.0.92 need upgrade.
[00083980][05 00][00] v3.0.6.2 -> v3.0.6.2
[00084115][09 00][00] v3.0.0.4 -> v3.0.0.4
[00096667][11 00][00] device not detected.
[00096715]Done.

[00100271]Waiting for user confirm...
[00110324]Timeout, start upgrade automatically.

[00110421]Firmware upgrading[1]...
[00110609][03 06] Firmware upgrade start...
[00406411][03 06] Firmware upgrade finished successfully.
[00406485][04 00] Firmware upgrade start...
[00458964][04 00] Firmware upgrade finished successfully.
[00459013]Done.

[00459074]Version checking[2]...
[00471620][08 00][00] device not detected.
[00471689][03 05][00] v34.1.0.10 -> v34.1.0.10
[00471769][03 06][05] v3.1.6.103 -> v3.1.6.103
[00471869][12 00][00] v1.12.0.0 -> v1.12.0.0
[00471989][12 01][00] v1.12.0.0 -> v1.12.0.0
[00472089][12 02][00] v1.12.0.0 -> v1.12.0.0
[00472210][12 03][00] v1.12.0.0 -> v1.12.0.0
[00484760][15 00][00] device not detected.
[00484817][19 00][00] v1.0.8.96 -> v1.0.8.96
[00484867][01 00][00] v2.65.5033 -> v2.65.5033
[00484916][01 01][00] v2.65.5033 -> v2.65.5033
[00484974][04 00][05] v1.29.0.92 -> v1.29.0.92
[00485068][05 00][00] v3.0.6.2 -> v3.0.6.2
[00485127][09 00][00] v3.0.0.4 -> v3.0.0.4
[00497677][11 00][00] device not detected.
[00497722]Packet upgrade failed at version checking.



[00006653]========== remo-con disconnect. boot(15) ============
[00006714]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x54a70f5e].
[00006778]Packet upgrade start...

[00006844]Packet checking...
[00006895]Packet vlink 01.03.0100 <-> 01.02.0080.
[00006987]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00007047]Done.

[00007093]Version checking[1]...
[00019649][08 00][00] device not detected.
[00019736][03 05][00] v34.1.0.10 -> v34.1.0.10
[00019836][03 06][00] v3.1.6.103 -> v3.1.6.103
[00019956][12 00][00] v1.12.0.0 -> v1.12.0.0
[00020056][12 01][00] v1.12.0.0 -> v1.12.0.0
[00020156][12 02][00] v1.12.0.0 -> v1.12.0.0
[00020256][12 03][00] v1.12.0.0 -> v1.12.0.0
[00032810][15 00][00] device not detected.
[00032979][19 00][00] v1.0.8.96 -> v1.0.8.96
[00033031][01 00][00] v2.65.5033 -> v2.65.5033
[00033082][01 01][00] v2.65.5033 -> v2.65.5033
[00033140][04 00][00] v1.29.0.92 -> v1.29.0.92
[00033234][05 00][00] v3.0.6.2 -> v3.0.6.2
[00033301][09 00][00] v3.0.0.4 -> v3.0.0.4
[00045853][11 00][00] device not detected.
[00047910]Packet upgrade failed at version checking.



[00006661]========== remo-con disconnect. boot(15) ============
[00006722]Packet [C:\MATRICE100_FW_V01.03.01.00.bin] detected, card sn [0x54a70f5e].
[00006802]Packet upgrade start...

[00006867]Packet checking...
[00006931]Packet vlink 01.03.0100 <-> 01.02.0080.
[00006997]Record vlink 01.01.0010 <-> 01.00.0007 (flow = 0).
[00007091]Done.

[00007155]Version checking[1]...
[00007213][08 00][00] v1.14.0.25 -> v2.14.9.42 need upgrade.
[00007292][03 05][00] v34.1.0.10 -> v34.1.0.10
[00007392][03 06][00] v3.1.6.103 -> v3.1.6.103
[00007514][12 00][00] v1.12.0.0 -> v1.12.0.0
[00007634][12 01][00] v1.12.0.0 -> v1.12.0.0
[00007732][12 02][00] v1.12.0.0 -> v1.12.0.0
[00007852][12 03][00] v1.12.0.0 -> v1.12.0.0
[00008025][15 00][00] v1.1.2.0 -> v1.1.2.0
[00008088][19 00][00] v1.0.8.96 -> v1.0.8.96
[00008139][01 00][00] v2.65.5033 -> v2.65.5033
[00008198][01 01][00] v2.65.5033 -> v2.65.5033
[00008260][04 00][00] v1.29.0.92 -> v1.29.0.92
[00008353][05 00][00] v3.0.6.2 -> v3.0.6.2
[00008414][09 00][00] v3.0.0.4 -> v3.0.0.4
[00020966][11 00][00] device not detected.
[00021014]Done.

[00023084]Waiting for user confirm...
[00033138]Timeout, start upgrade automatically.

[00033238]Firmware upgrading[1]...
[00033839][08 00] Firmware upgrade start...
[00543859][08 00] Firmware upgrade finished successfully.
[00543909]Done.

[00543962]Version checking[2]...
[00546571][08 00][05] v2.14.9.42 -> v2.14.9.42
[00546668][03 05][00] v34.1.0.10 -> v34.1.0.10
[00546748][03 06][00] v3.1.6.103 -> v3.1.6.103
[00546848][12 00][00] v1.12.0.0 -> v1.12.0.0
[00546948][12 01][00] v1.12.0.0 -> v1.12.0.0
[00547188][12 02][00] v1.12.0.0 -> v1.12.0.0
[00547288][12 03][00] v1.12.0.0 -> v1.12.0.0
[00549059][15 00][00] v1.1.2.0 -> v1.1.2.0
[00549123][19 00][00] v1.0.8.96 -> v1.0.8.96
[00549176][01 00][00] v2.65.5033 -> v2.65.5033
[00549228][01 01][00] v2.65.5033 -> v2.65.5033
[00549282][04 00][00] v1.29.0.92 -> v1.29.0.92
[00549368][05 00][00] v3.0.6.2 -> v3.0.6.2
[00549433][09 00][00] v3.0.0.4 -> v3.0.0.4
[00562002][11 00][00] device not detected.
[00562051]Packet upgrade failed at version checking.



认证设备
收藏 点赞 评论
分享至:
回复:
上传
取消 评论
快速回复 返回顶部 返回列表