请选择 进入手机版 | 继续访问电脑版
正在上传图片(0/1)

升级问题 | “悟” Inspire 1 Pro 固件升级包 v1.9.1.30

 0
手机看帖 7 4958
“悟” Inspire 1 Pro 固件升级包 v1.9.1.30,下载如常升级完成,其他正常,但APP显示不正常?电池需要放电一次?
1. 飞机和电池升级完成后,电池已经完整放电了(低于5%),基本放到0%。
2. 遥控器还要放电吗?
3. APP显示已经截图发上,大神们,大疆技术人员请指导下怎么做?谢谢!
4. 我的是大疆 “悟” Inspire 1 Pro(X5)配4电。
到官网下载的固件。http://www.dji.com/cn/inspire-1-pro-and-raw/info#downloads
如常升级后,APP显示的各版本固件。
不正常,我已经放电低于5%了,4块电池都试过全部显示上图,4块电池已经全部升级。
下部我如何做,指导下!谢谢!
评论
上传
你需要登录之后才能回帖    登录 | 注册
夏清  超级版主 2016-9-28 2#
您好,完整的充放电需要您先将电池放电至5%及以下,再充满的哦;具体升级步骤可以参考如下:http://bbs.dji.com/thread-33433-1-1.html
请问您升级的时候有没有将电池放入飞行器呢?
“使用App升级固件,直接更换上需要升级的电池,在App的模块自检会提示电池需要升级,点击升级即可;
如果使用SD卡升级固件的,把固件保留在SD卡里面,换上需要升级的电池,然后开机会自动升级;
升级过程的提示音和和状态与升级飞行器的类似,每块电池升级时间大约是3-5分钟。”
微信关注“大疆”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
楼主   2016-9-28 3#
你好,
回答1:已经将电池完整放到0%再充满,
回答2:电池肯定放在飞行器升级啦。(没有电也升级不了)
回答3:APP、遥控器、飞行器、电池都升级了(你看看上图的固件版本号)
希望有合理的回复。谢谢!
楼主   2016-9-28 4#
附上升级后完成的数据:
========== 2015.11.19 18:11:54 =====================
Packet: WM610_FC550_FW_V01.00.00.30_1012.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2016.03.11 22:19:11 =====================
Packet: WM610_FC550_FW_V01.04.00.70.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.04.00.70.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.04.00.70.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.04.00.70.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.04.00.70.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.04.00.70.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.04.00.70.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.04.00.70.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.

========== 2014.01.01 00:00:05 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Upgrading ...
Result: Success.

========== 2014.01.01 00:00:06 remo-con disconnect======
Packet: WM610_FC550_FW_V01.09.01.30.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the device.
楼主   2016-9-29 5#
大神们,大疆的技术们 解答下,谢谢!
djiwukongm@sina  Inspire 1 Pro认证用户 2016-10-15 6#
放电不够,要放到自动关机为止。
fans057c775d  Inspire 1 Pro认证用户 2016-11-11 7#
夏清 发表于 2016-9-28 09:05
您好,完整的充放电需要您先将电池放电至5%及以下,再充满的哦;具体升级步骤可以参考如下:http://bbs.dji ...
秋香 问你个问题 请问X3升级到1.9后  相机版本是多少了   找了好久没找到帖子
夏清  超级版主 2016-11-13 8#
fans057c775d 发表于 2016-11-11 22:12
秋香 问你个问题 请问X3升级到1.9后  相机版本是多少了   找了好久没找到帖子 ...
您好,飞机版本号为 v1.9.1.30时,相机版本号是 v1.9.1.10
微信关注“大疆”,获取最全面的大疆产品教学视频,及时的售后服务动态,最实用的飞行指引和专业的技术支持,都在这里
收藏 点赞 评论
分享至:
回复:
上传
取消 评论
快速回复 返回顶部 返回列表