请选择 进入手机版 | 继续访问电脑版
正在上传图片(0/1)

升级失败,发出连续的尖锐的声音!

 0
手机看帖 6 1163
精灵3专业版,升级1.4固件失败,开机后是连续的尖锐的声音,电池灯还跟着节奏一闪一闪,怎么解决啊?
评论
上传
你需要登录之后才能回帖    登录 | 注册
楼主  Mavic Air认证用户 2015-9-27 2#
关机后把内存卡放到电脑上看结果,如下
Result: Success.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.06.22 08:42:31 =====================
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.

========== 2015.08.06 09:56:01 =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2015.08.06 10:12:28 =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...

========== 2014.01.01 00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
楼主  Mavic Air认证用户 2015-9-27 3#
翻阅了别人的帖子,已经解决了!
skopri@163.com  Phantom 3 Advanced认证用户 2015-9-27 4#
重复升级导致
frankma  Phantom 3 Professional认证用户 2015-9-27 5#
912925 发表于 2015-9-27 16:21
翻阅了别人的帖子,已经解决了!
请分享一下解决方案
楼主  Mavic Air认证用户 2015-9-27 6#
frankma 发表于 2015-9-27 18:30
请分享一下解决方案
格式化存储卡,把固件重新复制到卡上,启动飞机电源,还是会发出尖叫声,一直让它持续,大约五分到八分钟左右,会转为嘀--嘀嘀的声音,此时,重刷固件成功。
frankma  Phantom 3 Professional认证用户 2015-9-28 7#
912925 发表于 2015-9-27 21:46
格式化存储卡,把固件重新复制到卡上,启动飞机电源,还是会发出尖叫声,一直让它持续,大约五分到八分钟 ...


是这样成功的,感谢!
已累计飞行138466米
认证设备
收藏 点赞 评论
分享至:
回复:
上传
取消 评论
快速回复 返回顶部 返回列表